CONTINUOUS HORIZONTAL CASTING INTO JET CRYSTALLIZER OF INGOTS WITH DIAMETER 70 MM OF SILUMIN AK 18
Abstract
It is shown that continuous horizontal casting of hypereutectic silumin Al+18%Si in jet crystallizer allows to obtain ingots of 70 mm in diameter with modified eutectic, and use of method of hereditary modification provides crushing f crystals of primary silicon without application of admixture modifiers.
About the Authors
V. Ju. Stetsenko
Institute of Technology of Metals of the NAS of Belarus
Беларусь
Беларусь
A. I. Rivkin
Institute of Technology of Metals of the NAS of Belarus
Беларусь
Беларусь
A. P. Gutev
Institute of Technology of Metals of the NAS of Belarus
Беларусь
Беларусь
A. M. Pevnev
Institute of Technology of Metals of the NAS of Belarus
Беларусь
Беларусь
R. V. Konovalov
Institute of Technology of Metals of the NAS of Belarus
Беларусь
Беларусь
Suk-Bong Kang
KIMS
Южная Корея
Южная Корея
References
1. Альтман М. Б., Стромская Н. П. Повышение свойств стандартных литейных алюминиевых сплавов. М.: Меаллургия, 1984.
2. Марукович Е. И., Стеценко В. Ю. Модифицирование сплавов. Мн.; Беларуская навука, 2009.
Review
For citations:
Stetsenko V.J., Rivkin A.I., Gutev A.P., Pevnev A.M., Konovalov R.V., Kang S. CONTINUOUS HORIZONTAL CASTING INTO JET CRYSTALLIZER OF INGOTS WITH DIAMETER 70 MM OF SILUMIN AK 18. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2009;(3):116-117. (In Russ.)
Views:
469
JATS XML
Email this article 