DETERMINATION OF RATIONAL CONSTRUCTION OF DEVICE OF FLOODED-JET SECONDARY COOLING
Abstract
Procedure of definition of rational design of the device of submerged-Jet secondary cooling of billets of 75 mm in diameter is developed. It is shown that the maximum cooling ability of the device is reached at width of ring slot of 10 mm and distance between apertures of 20 mm in the screen.
About the Authors
V. Ju. Stetsenko
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
R. V. Konovalov
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
A. I. Rivkin
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
A. P. Gutev
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
A. P. Pevnev
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
References
1. Марукович Е. И., Стеценко В. Ю. Получение отливок из заэвтектического силумина методом литья закалочным затвердеванием // Литье и металлургия, 2005. № 2. С. 142-144.
2. Баландин Г. Ф. Основы теории формирования отливки. М.: Машиностроение, 1979. Ч. I.
Review
For citations:
Stetsenko V.J., Konovalov R.V., Rivkin A.I., Gutev A.P., Pevnev A.P. DETERMINATION OF RATIONAL CONSTRUCTION OF DEVICE OF FLOODED-JET SECONDARY COOLING. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2009;(3):120-121. (In Russ.)
Views:
2004
Email this article 