PRODUCTION OF CASTINGS OF STEEL 6XB2C BY MEANS OF ELECTROSLAG CHILL CASTING
Abstract
It is shown that by means of electroslag casting the ingots of knife billets with necessary configuration with minimal allowances for consequential mechanical processing can be produced.
About the Authors
V. A. Zemtsov
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
V. A. Meshkov
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
I. O. Sazonenko
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
References
1. Земцов В. А., Мешков Д. А., Сазоненко И. О. Применение электрошлаковой тагельной плавки для получения отливок ответственного назначения, используемых в машиностроении //Литье и металлургия. 2008. № 3/47. С. 166-170.
Review
For citations:
Zemtsov V.A., Meshkov V.A., Sazonenko I.O. PRODUCTION OF CASTINGS OF STEEL 6XB2C BY MEANS OF ELECTROSLAG CHILL CASTING. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2009;(3):236-240. (In Russ.)
Views:
451
Email this article 