MAIN PROBLEMS OF MODERN MODIFYING OF ALLOYS. SOLUTIONS
Abstract
It is shown that the main problems of modern modifying of alloys are connected with the air atmosphere and use of impurity modifiers. For the solution of these problems it is necessary to use the accelerated hardening, fine-crystalline furnace charge and protection against atmospheric vapors of water.
Keywords
References
1. Marukovich E. I., Stetsenko V. Yu. Modificirovanie splavov [Modifying of alloys]. Minsk, Belaruskaya navuka Publ., 2009.
2. Stetsenko V. Yu. Vliyanie sorbcii i desorbcii vodoroda i kisloroda na processy modificirovaniya i kristallizacii splavov [Influence of sorption and desorption of hydrogen and oxygen on processes of modifying and crystallization of alloys]. Lit’e i metallurgiya = Foundry production and metallurgy, 2010, no 3, pp. 91–96
3. http://tehtab.ru/Guide/GuidePhysics/Humidity/ClimateHumidity/.
4. Chursin V. M. Plavka mednyh splavov [Melting of copper alloys]. Moscow, Metallurgiya Publ., 1982.
5. Stetsenko V. Yu. Modificirovanie splavov uskorennym zatverdevaniem. Sbornik statej. Tekhnologii lit’ya i metallurgii [Modifying of alloys the accelerated hardening. Collection of articles. Technologies of molding and metallurgy]. Minsk, Belaruskaya navuka Publ., 2010.
6. Stetsenko V. Yu. Modificirovanie vtorichnyh splavov [Modifying of secondary alloys]. Lit’e i metallurgiya = Foundry production and metallurgy, 2015, no 3, pp. 54–56.
Review
For citations:
Stetsenko V.Yu. MAIN PROBLEMS OF MODERN MODIFYING OF ALLOYS. SOLUTIONS. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2016;(2):10-13. (In Russ.)
Views:
789
Email this article 