HIGH-SPEED HOT EXTRUSION IN HIGH TEMPERATURE MECHANICAL TREATMENT MODE OF BIMETALLIC ROD PARTS OF THE STAMPS
Abstract
Processes of high-speed shaping change and especially high-speed hot extrusion create efficient conditions for treatment of low plastic and difficult-to-form materials which are widely used in tool making production. Due to the fact that high-speed stamping provides accurate billets with increased mechanical properties, it can be used as a technological process for manufacturing rod parts of die tooling operating under the increased loads and high wear. The purpose of the paper is to carry out experimental investigation of the possibility to obtain bimetallic rod stamping tooling by high-speed hot extrusion in high-temperature mode treatment in order to save die steels and improve the quality of the products obtained. Microstructures of the bimetallic compounds obtained with the help of high-speed hot extrusion method for compositions of structural and high-alloy steels have been investigated and their high quality has been proved during the investigations. Dependences of micro-hardness distribution have been established outbound two steel contact plane in the zone of connection that are characterized by a minimum micro-hardness value in the connection joint. Availability of more plastic zone in the contact plane contributes to reduction of residual stresses due to their relaxation in this zone and higher joint strength.
About the Authors
I. V. Kachanov
Belarusian National Technical University
Belarus
Belarus
V. N. Shariy
Belarusian National Technical University
Belarus
Belarus
V. V. Vlasov
Belarusian National Technical University
Belarus
Belarus
References
1. Kachanov I. V. Skorostnoe gorjachee vydavlivanie sterzhnevyh izdelij [High-speed extrusion of hot rod articles]. Minsk, UP «Tehnoprint» Publ., 2002, 327 p.
2. Shorshorov M. H., Kolesnichenko V. A., Alehin V. P. Klinopressovaja svarka davleniem raznorodnyh metallov [Klinopressovaya pressure welding of dissimilar metals]. Moscow, Metallurgija Publ., 1982, 112 p.
3. Gel’man A. S. Osnovy svarki davleniem [Pressure welding Basics]. Moscow, Metallurgija Publ., 1970, 312 p.
4. Zubchenko A. S., Koloskov M. M., Kashirskij Yu. V. Marochnik stalej i splavov [Database of steels and alloys]. Moscow, Engineering Publ., 2003, 784 p.
5. Baranovskij M. A., D’jakonov O. M., Kachanov I. V., Shabeka I. S. Instrument dlja vysokoskorostnoj shtampovki [Tool for high speed stamping]. A. s. № 871967 SSSR, 1981.
6. Kachanov I. V., Zdor G. N., Isaevich L. A., Sharij V. N., Kudin M. V., Vlasov V. V. Sposob shtampovki detalej so sterzhnem [Punching method with the shaft parts]. Patent RB, no. 18113, 2014.
7. Kachanov I. V., Sharij V. N., Kudin M. V., Buto D. I, Hodos., I. A., Vlasov V. V. Sposob izgotovlenija klapana dvigatelja vnutrennego sgoranija [Способ изготовления клапана двигателя внутреннего сгорания]. Patent RB, no. 16601, 2013.
8. Shmykov A. A. Spravochnik termista [Directory treater]. Moscow, Mashgiz Publ., 1981, 331 p.
Review
For citations:
Kachanov I.V., Shariy V.N., Vlasov V.V. HIGH-SPEED HOT EXTRUSION IN HIGH TEMPERATURE MECHANICAL TREATMENT MODE OF BIMETALLIC ROD PARTS OF THE STAMPS. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2016;(2):93-98. (In Russ.)
Views:
624
Email this article 