INFLUENCE OF SOFT: SQUEEZING ON THE AXIAL CHEMICAL HETEROGENEITY DEGREE AT PRODUCTION OF CONTINUOUSLY-CASTED INGOTS. Message 2. Mathematical modeling and analysis of the results
https://doi.org/10.21122/1683-6065-2008-4-41-46
Abstract
Mathematical model and results of calculation analysis on determination of influence of ‘'soft squeezing” on degree of axial chemical heterogeneity(distribution of carbon, sulfur and manganese) in billets, produced by means of continuous casting, are given.
About the Authors
Ju. A. Samojlovich
Platan
Russian Federation
Russian Federation
V. I. Timoshpolskij
Eurosteel Ltd
Ukraine
Ukraine
I. A. Trusova
Belarusian National Technical University
Belarus
Belarus
N. L. Mandel
Belarusian National Technical University
Belarus
Belarus
References
1. Самойлович Ю. А., Тимошпольский В. И. Влияние мягкого обжатия на степень осевой химической неоднородности при производстве непрерывнолитых заготовок. Сообщение 1. Анализ существующих методов промышленной реализации и расчета режимов мягкого обжатия // Литье и металлургия. 2008. № 3. С. 99-105.
2. Schwerdtfeger К. Influence of solidification rate on the microsegregation and interdendritic precipitation of manganesesulphide inclusions in a steel containing manganese and carbon. Archive f d. Eisenhuttenwessen. 1970. Bd. 41. H.9. S. 923-937.
Review
For citations:
Samojlovich J.A., Timoshpolskij V.I., Trusova I.A., Mandel N.L. INFLUENCE OF SOFT: SQUEEZING ON THE AXIAL CHEMICAL HETEROGENEITY DEGREE AT PRODUCTION OF CONTINUOUSLY-CASTED INGOTS. Message 2. Mathematical modeling and analysis of the results. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2008;(4):41-46. (In Russ.) https://doi.org/10.21122/1683-6065-2008-4-41-46
Views:
348
Email this article 