INVESTIGATION OF THE PROPERTIES OF THE SUSPENSIONS FOR NON-STICK COATINGS FOR FOUNDRY
https://doi.org/10.21122/1683-6065-2015-1-37-41
Abstract
The research aimed at figuring out dependence of the technological properties (density, thickness of the coating, reduced strength and sedimentation stability) of the suspensions for nonstick coatings on the for activation time powder quartz graphite filler. It is shown that with increasing activation time to 10 minutes all the basic properties of graphite suspension powder quartz were improved. The paper presents the results of comparative studies of technological properties of suspensions of activated graphite oxide compositions prepared on the basis of activated aluminum oxide and periclase. The resulting suspension may be recommended for cast iron and non-ferrous castings.
About the Authors
T. Gil’manshina
Siberian Federal University, Krasnoyarsk
Russian Federation
Russian Federation
Doctor of Engineering
Corresponding author: Gil’manshina Tat’jana, Siberian Federal University, Russia, Krasnoyarsk, 95, Email: gtr1977@mail.ru.
S. Lytkina
Siberian Federal University, Krasnoyarsk
Russian Federation
Russian Federation
Associate Professor, PhD in Engineering
T. Bogdanova
OOO «KiK», Krasnoyarsk
Russian Federation
Russian Federation
S. Hudonogov
Siberian Federal University, Krasnoyarsk
Russian Federation
Senior Lecturer
Russian Federation
Senior Lecturer
A. Kosovich
Siberian Federal University, Krasnoyarsk
Russian Federation
Postgraduate
Russian Federation
Postgraduate
E. Partyko
Siberian Federal University, Krasnoyarsk
Russian Federation
Postgraduate
Russian Federation
Postgraduate
References
1. Kirjuhina N. B., Bugaev R. E. Issledovanija i razrabotka novogo pokolenija razdelitel’nyh pokrytij [Research and development of a new generation of barrier coatings]. Progressivnye tehnologicheskie processy i oborudovanie v litejnom proizvodstve: sb. nauch. tr. mezhdunarodnoj nauch.-tehn. konf. Pod red. A. P. Truhova, M. Ju. Ershova. Moscow: Izdvo MGTU «MAMI» [Proc. of the Bauman MSTU «Progressive technological processes and equipment in the foundry industry»: proceedings of the international scientific technical conference, edited by A. P. Truhova, M. Ju. Ershova.]. 2002, pp. 55–60.
2. Zhukovskij S. S., Anisovich N. I. i dr. Formovochnye materially I tehnologija litejnoj formy: Spravochnik [Molding materials and technology mold: a Handbook]. Moscow, Mashinostroenie Publ., 1993. 432 p.
3. Boldin A. N., Davydov N. I., Zhukovskij S. S. i dr. Litejnye formovochnye materialy. Formovochnye, sterzhnevye smesi I pokryt ija: Spravochnik [Foundry molding materials. Moulding and core sand and coatings: a Handbook]. Moscow, Mashinostro enie Publ., 2006. 507 p.
4. Doroshenko S. P. Formovochnye materially i smesi [Molding materials and mixtures]. Kiev, the Higher School Publ., 1990. 415 p.
5. Mamina L. I., Novozhonov V. I., Gil’manshina T. R. i dr. Sposoby povyshenija kachestva litejnogo grafita otdel’nymi I kompleksnymi metodami aktivacii [Ways to improve the quality foundry graphite single and complex methods of Monograph]. Krasnoyarsk, Siberian Federal University Publ., 2011. 160 p.
6. Gil’manshina T. R., Mamina L. I., Baranov V. N. i dr. Issledovanie zavisimosti smachivaemosti I spol’zuemyh v metallurgii grafitov razlichnogo kachestva [The study of the dependence of wettability used in metallurgy graphites of different quality]. Vestnik Magnitogorskogo gosudarstvennogo tehnicheskogo universiteta im. G. I. Nosova [Vestnik of Nosov Magnitogorsk State Technical University], 2013, no. 3(43), pp. 55–58.
Review
For citations:
Gil’manshina T., Lytkina S., Bogdanova T., Hudonogov S., Kosovich A., Partyko E. INVESTIGATION OF THE PROPERTIES OF THE SUSPENSIONS FOR NON-STICK COATINGS FOR FOUNDRY. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2015;(1):37-41. (In Russ.) https://doi.org/10.21122/1683-6065-2015-1-37-41
Views:
1098
Email this article 