MAIN PROBLEMS OF MOULDING OF SILUMINS. WAYS OF SOLUTION
Abstract
The main problems of silumin’ moulding are connected with insufficient modifying of casting structure, their considerable inclination to gas porosity, difficult to remove nonmetallic inclusions and these features are shown in the article. Protection of liquid silumin from influence of the air atmosphere; use of crucibles from aluminum oxide; refinement of fusion from nonmetallic inclusions and application of the accelerated hydrogen hardening of castings were used to solve these problems, as it is shown in the article.
About the Authors
E. I. Marukovich
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
V. Yu. Stetsenko
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
References
1. Kudyumov A. V., Pikunov M. V., Chursin V. M., Bibikov E. L. Proizvodstvo otlivok iz splavov cvetnyh metallov [Production of castings from alloys of non-ferrous metals]. Moscow, Metallurgiya Publ., 1986.
2. Marukovich E. I., Stetsenko V. Yu. Modificirovanie splavov [Modifying of alloys]. Minsk, Belaruskaya navuka Publ., 2009.
3. Boom E. A. Priroda modificirovaniya splavov tipa silumin [The nature of modifying of alloys like alpax]. Moscow, Metallurgiya Publ., 1972.
4. Al‘tman M. B., Stromskaya N. P. Povyshenie svojstv standartnyh litejnyh alyuminievyh splavov [Increase of properties of standard foundry aluminum alloys]. Moscow, Metallurgiya Publ., 1984.
5. Ershov G. S., Bychkov Yu. B. Vysokoprochnye alyuminievye splavy iz vtorichnogo syrya [High-strength aluminum alloys from secondary raw materials]. Moscow, Metallurgiya Publ., 1979.
6. Dobatkin V. I., Gabidullin R. M., Kolachev B. A., Makarov G. S. Gazy i okisly v alyuminievyh deformiruemyh splavah [Gases and oxides in aluminum deformable alloys]. Moscow, Metallurgiya Publ., 1976.
Review
For citations:
Marukovich E.I., Stetsenko V.Yu. MAIN PROBLEMS OF MOULDING OF SILUMINS. WAYS OF SOLUTION. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2016;(3):28-30. (In Russ.)
Views:
600
Email this article 