STRENGTH ANALYSIS OF BANDED ROLL FOR ASYMMETRIC ROLLING
Abstract
The calculation of the nominal torque on the rolls during asymmetric rolling of a strip with small laminated springs are held. To stabilize the rolling process it is proposed to use a front tension and a certain minimum value was calculated. Misalignment of the circumferential speeds of the driving and driven rolls are calculated. The design of a composite roll banded with two tabs on the brace and the two grooves on the shaft are proposed. Crumpling test and shear test of the tabs on the brace were conducted. Necessary structural toughness was provided.
About the Authors
L. A. Isaevich
Belarusian National Technical University
Belarus
Belarus
D. M. Ivanickij
Belarusian National Technical University
Belarus
Belarus
M. I. Sidorenko
Belarusian National Technical University
Belarus
Belarus
References
1. Vydrin V. N. Dinamika prokatnyh stanov [Dynamics of rolling mills]. Sverdlovsk, Metallurgizdat Publ., 1960, 255 p.
2. Stepanenko A. V., Karpickij Ju. V., Smirnova L. A. Kinematicheskie i silovye parametry prokatki s kriticheskim rassoglasovaniem okruzhnyh skorostej valkov [Kinematic and force parameters of rolling with the critical misalignment of the circumferential speeds of the rolls]. Doklady NAN Belarusi = Reports of the National Academy of Sciences of Belarus, 1999, vol. 43, no. 5, pp. 111–113.
3. Stepanenko A. V., Isaevich L. A., Karpickij Ju. V., Smirnova L. A. Prokatka polos s kriticheskim rassoglasovaniem okruzhnyh skorostej valkov [The rolling of a strip with the critical misalignment of the circumferential speeds of the rolls]. «Tehnologija 99» Materialy 6-j Mezhdunarodnoj nauchno-tehnicheskoj konferencii = «Technology 99» Materials of 6th International scientific-technical conference. Bratislava (Slovakia), 1999, p. 1, pp. 417–420.
4. Stepanenko A. V., Korol’ V. A., Smirnova L. A. Prokatka polos peremennogo profilja [The rolling of a strip with variable profile]. Gomel, Institute of Mechanics of Metal-Polymer Systems of the National Academy of Sciences of Belarus Publ., 2001, 180 p.
5. Tret’jakov A. V., Zjuzin A. I. Mehanicheskie svojstva metallov i splavov pri obrabotke davleniem: Spravochnik [Mechanical properties of metals and alloys under pressure treatment: a Handbook]. Moscow, Metallurgy Publ., 1973, 223 p.
6. Rukovodjashhij dokument 37.002.0490–86. Konstruirovanie shtampov listovoj shtampovki [Guidance document 37.002.0490-86. Design of dies for sheet forming]. Moscow, Scientific-production Union state scientific-research Institute of automobile industry Publ., 1987, 329 p.
Review
For citations:
Isaevich L.A., Ivanickij D.M., Sidorenko M.I. STRENGTH ANALYSIS OF BANDED ROLL FOR ASYMMETRIC ROLLING. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2016;(3):105-110. (In Russ.)
Views:
472
Email this article 