HYPEREUTECTIC SILUMIN.NANOSTRUCTURAL PROCESSES OF MELTING AND MOULDING
Abstract
It is shown that melting and molding of hypereutectic silumin are complicated physical and chemical nanostructural processes. The major part at these processes is played by the centers of crystallization of primary crystals of silicon, silicon nanocrystals, the dissolved and adsorbed oxygen. The part of the modifying crystals of Cu3P is reduced to decreasing of concentration of the adsorbed oxygen and an intensification of process of coagulation of nanocrystals of silicon in the centers of crystallization of primary crystals of silicon.
About the Author
V. Yu. Stetsenko
Institute of Technology of Metals of the NAS of Belarus
Belarus
11, Bialynitskogo-Biruli str., Mogilev
Belarus
11, Bialynitskogo-Biruli str., Mogilev
References
1. Kubashevskij O., Olkokk K. B. Metallurgicheskaya termohimiya [Metallurgical thermochemistry]. Moscow, Metallurgiya Publ., 1982.
2. Dvojnye i mnogokomponentnye sistemy na osnove medi. Spravochnik [Double and multicomponent systems on the basis of cop- per. Reference book]. Moscow, Nauka Publ., 1979.
3. Marukovich E. I., Stetsenko V. Yu. Modificirovanie splavov [Modifying of alloys]. Minsk, Belaruskaya navuka Publ., 2009.
4. Brodova I. G., Popel’ P. S., Barbin N. M., Vatolin N. A. Iskhodnye rasplavy kak osnova formirovaniya struktury i svojstv aly- uminievyh splavov [Initial fusions as basis of formation of structure and properties of aluminum alloys]. Ekaterinburg, UrO RAN Publ., 2005.
5. Ershov G. S., Bychkov Yu. B. Vysokoprochnye alyuminievye splavy iz vtorichnogo syr’ya [High-strength aluminum alloys from secondary raw materials]. Moscow, Metallurgiya Publ., 1979.
6. Stetsenko V. Yu. Klastery v zhidkih metallah – stabilnye nanokristally [Clusters in liquid metals – stable nanocrystals].Lit’e i metallurgiya = Foundry production and metallurgy, 2015, no. 2, pp. 33–35.
7. Zalkin V. M. Priroda ehvtekticheskih splavov i ehffekt kontaktnogo plavleniya [Nature of the eutectic alloys and effect of contact melting]. Moscow, Metallurgiya Publ., 1987.
8. Stetsenko V. Yu. Opredelenie mekhanizmov lit’ya alyuminievo-kremnievyh splavov s vysokodispersnoj i invertirovannoj mikrostrukturoj [Definition of mechanisms of molding of aluminum-silicon alloys with the high-disperse and inverted microstructure]. Lit’e i metallurgiya = Foundry production and metallurgy, 2013, no. 2, pp. 22–29.
Review
For citations:
Stetsenko V.Yu. HYPEREUTECTIC SILUMIN.NANOSTRUCTURAL PROCESSES OF MELTING AND MOULDING. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2016;(4):19-22. (In Russ.)
Views:
603
Email this article 