CONSIDERATION OF MECHANISMS OF FORMING THE SURFACE OF CASTING IN THE ZONE CONTACT METAL-MOLD CORE
Abstract
Considered physico-mechanical, physico-chemical processes occurring in the zone contact metal-mold core at all stages of the formation of the casting. The degree of influence of these processes on the formation of internal surfaces of castings.
About the Authors
I. B. Odarchenko
Pavel Sukhoi State Technical University of Gomel
Belarus
Gomel, 48, Oktyabrya ave.
Belarus
Gomel, 48, Oktyabrya ave.
I. N. Prusenko
Pavel Sukhoi State Technical University of Gomel
Belarus
Gomel, 48, Oktyabrya ave.
Belarus
Gomel, 48, Oktyabrya ave.
References
1. Guljaev B. B. Litejnye process [Casting processes]. Moscow, Mashinostroenie Publ., 1960. 416 p.
2. Medvedev Ja. I. Gazovye processy v litejnoj forme [Gas processes in the mold]. Moscow, Mashinostroenie Publ., 1980. 200 p.
3. Churkin B. S. Teorija litejnyh processov [Theory of casting processes]. Ekaterinburg, 2006. 454 p.
4. Soljakov D. A., Boldin A. N., Jakovlev A. I. Processy gazovydelenija iz sterzhnej gorjachego i holodnogo otverzhdenija [Gas evalution from the cores made by Hot-boxand Cold-box-amin-processes]. Moscow, Mashinostroenie-1 Publ., 2004. 200 p.
5. Kolotilo D. M. Gazotvornost’ i koksoobrazovanie organicheskih kompоnentov formy pri zalivke [Gas evalution and coke formation organic components form when pouring]. Litejnoe proizvodstvo = Foundry production. 1976. no. 3. pp. 27–29.
Review
For citations:
Odarchenko I.B., Prusenko I.N. CONSIDERATION OF MECHANISMS OF FORMING THE SURFACE OF CASTING IN THE ZONE CONTACT METAL-MOLD CORE. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2016;(4):32-37. (In Russ.)
Views:
488
Email this article 