PRODUCTION OF BIMETALLIC CASTINGS OF STEEL — HARD ALLOY
Abstract
Неге are described two methods of productions of bimetal castings steel-hard alloy. The essence of the 1st method is in surfacing of the inner surface of rotating steel form with self-fluxing Ni-Cr based powder. The essence of the 2nd method is teeming of melted cast iron into rotating heated steel form and following heat treatment of the billet to provide hardness of the surfased layer not less than 63 HRC.
About the Authors
E. I. Marukovich
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
Jong-Hoon Lee
Korea Institute of Machinery and Materials
Korea, Republic of
Korea, Republic of
Ki-Young Choi
Korea Institute of Machinery and Materials
Korea, Republic of
Korea, Republic of
Wee-Do Yoo
Korea Institute of Machinery and Materials
Korea, Republic of
Korea, Republic of
D. A. Meshkov
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
V. Ju. Stetsenko
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
Review
For citations:
Marukovich E.I., Lee J., Choi K., Yoo W., Meshkov D.A., Stetsenko V.J. PRODUCTION OF BIMETALLIC CASTINGS OF STEEL — HARD ALLOY. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2006;(3):57-60. (In Russ.)
Views:
1956
Email this article 