MECHANISM OF CASTING OF MATERIALS BY METHOD OF THIXOCOMPACTING
Abstract
There is experimentally investigated the evolution of the structure at casting of materials in hard-liquid state by method of thixocompacting by the example of fusible systems. There are determined the temporary dependencies of the particles diameters, distances between their centers and porosity under different conditions of the process (sizes and space distribution of the particles of basic material, temperature regimes, the compacting pressure).
About the Authors
N. K. Tolochko
Institute of Technical Acoustics of NAS of Belarus
Belarus
Belarus
Ju. A. Shienok
Institute of Technical Acoustics of NAS of Belarus
Belarus
Belarus
References
1. Flemings М.С. SSM: some thoughts on past milestones and on the path ahead // Proc. 6-th Int. Conf. “Semi-solid processing of alloys and composites”. Turin. Italy. Sept. 27-29. 2000. P. 11-13.
2. Kirkwood D.H. Semisolid processing of high melting point alloys // Proc. 4-th Int. Conf. “Semi-solid processing of alloys and composites”. Sheffield. England. June 19-21. 1966. P. 320-325.
3. Jurко J.A., Niu X.P., Pinwill I. Thixocasting of nearliquidus cast Al-Mg based alloy // J. Mater. Sci. Letters. 1999. V M, Vol. 18. P. 1869-1870.
4. Walukas D., Le Beau S., Prewitt N., Decker R. Thixomoulding - technology opportunities and practical uses // Proc. 6-th Int. Conf. “Semi-solid processing of alloys and composites”. Turin. Italy. Sept. 27-29. 2000. P. 109-114.
5. Толочко H.K., Шиенок Ю.А., Мяльдун А.Я., Мозжаров С.Е. Рео- и тиксокомпактирование - новые подходы к литью материалов в твердожидком состоянии // Литье и металлургия. 2003, № 2. С. 39-46.
Review
For citations:
Tolochko N.K., Shienok J.A. MECHANISM OF CASTING OF MATERIALS BY METHOD OF THIXOCOMPACTING. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2004;(1):115-119. (In Russ.)
Views:
346
Email this article 