INTENSIFICATION OF THE PROCESS OF SEPARATION OF THE BAR ASSORTMENT BY CROSS-SCREW ROLLING
https://doi.org/10.21122/1683-6065-2017-2-65-69
Abstract
Based on the analysis of the known methods of separation of the bar stock into cut-to-length sections, it has been found that the most effective is the process of transverse screw rolling with the preliminary application of a ring-shaped wedge-shaped groove to the bar. In order to reduce its depth, it is proposed during the rolling process to displace the separated part of the material in a plane perpendicular to the axis of the rod by the amount of plastic crushing characteristic for the stamp cutting of the assortment.
About the Authors
M. I. Sidorenko
Belarusian National Technical University
Belarus
Minsk,65, Nezavisimosty ave.
Belarus
Minsk,65, Nezavisimosty ave.
L. A. Isaevich
Belarusian National Technical University
Belarus
Minsk,65, Nezavisimosty ave.
Belarus
Minsk,65, Nezavisimosty ave.
D. M. Ivanickij
Belarusian National Technical University
Belarus
Minsk,65, Nezavisimosty ave.
Belarus
Minsk,65, Nezavisimosty ave.
References
1. Semenov V. I. Kovka i shtampovka. Holodnaja ob’emnaja shtampovka [Forging and stamping. Cold forging]. Moscow, Mashinostroenie Publ., 1987, 193 p.
2. Egorov M. E. Tehnologija mashinostroenija [Technology of mechanical engineering]. Moscow, Vysshaja shkola Publ., 1976, 534 p.
3. Solovcov S. S. Otrezka v shtampah tochnyh zagotovok ot sortovogo prokata [Cutting in dies of precision billets from long products]. Moscow, NIImash Publ., 1980, 52 p.
4. Kamnev P. V. Sovershenstvovanie kuznechno-shtampovochnogo proizvodstva [Improvement of forging and stamping production]. Leningrad, Mashinostroenie Publ., 1971, 279 p.
5. Klushin V. A. Sovershenstvovanie poperechno-klinovoj prokatki [Perfection of cross-wedge rolling]. Minsk, Nauka i tehnika Publ., 1974, 155 p.
6. Kazanskaja I. I., Muhonin V. F., Markov Ju. A. Stany dlja proizvodstva tochnyh zagotovok mashinostroitel’nyh detalej [Mills for the production of precision blanks of engineering components]. Kuznechno-shtampovochnoe proizvodstvo = Forging and stamping production, 1974, no. 4, pp. 5–8.
7. Vasil’chikov M. V. Proizvodstvo tochnyh zagotovok mashinostroitel’nyh detalej prokatkoj [Production of precision blanks of machine-building details by rolling]. Moscow, MTJeiTM Publ., 1968, 338 p.
8. Sidorenko M. I. Razdelenie prutkov na mernye zagotovki [Separation of bars into dimensional blanks]. Minsk, PARADOKS Publ., 1999, 228 p.
9. Sidorenko M. I. Osobennosti razdelenija prutkovogo sortamenta na mernye zagotovki rolikovymi klinovidnymi nozhami [Features of the division of the bar stock into dimensional billets by roller wedge-shaped knives]. Vescі Natsyjanal’naj akadjemіі navuk Belarusі. Seryja fіzіka-tehnіchnyh navuk = Proceeding the National Academy of Sciences of Belarus. A series of physical and technical sciences, 2012, no. 1, pp. 43–50.
10. Stepanenko A. V. e. a. Ustrojstvo dlja prokatki cilindricheskih zagotovok iz prutka [A device for rolling cylindrical bars from a rod]. Patent USSR, no. 1260087, 1986.
11. Zubcov M. E. Listovaja shtampovka [Sheet stamping]. Leningrad, Mashinostroenie Publ., 1980, 432 p.
12. Gromov N. P. Teorija obrabotki metallov davleniem [Theory of metal forming]. Moscow, Metallurgija Publ., 1978, 360 p.
13. Odincov L. G. Uprochnenie i otdelka detalej poverhnostnym plasticheskim deformirovaniem [Hardening and finishing of parts by surface plastic deformation]. Moscow, Mashinostroenie Publ., 1987, 328 p.
Review
For citations:
Sidorenko M.I., Isaevich L.A., Ivanickij D.M. INTENSIFICATION OF THE PROCESS OF SEPARATION OF THE BAR ASSORTMENT BY CROSS-SCREW ROLLING. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2017;(2):65-69. (In Russ.) https://doi.org/10.21122/1683-6065-2017-2-65-69
Views:
591
Email this article 