Preview

SPECIAL FEATURES OF MAGNETIC PULSE HARDENING PROCESSING OF STEEL CYLINDRICAL PRODUCTS OF VARIABLE CROSS-SECTION

https://doi.org/10.21122/1683-6065-2017-2-88-96

Abstract

The calculations of the magnetic field induction and the magnetic field intensity were carried out by the Finite Element Method (FEM) with the use of the software FEMM. The cylindrical inductor of the Magnetic-Pulse Installation (MPI) generates the magnetic field near the surface of the cylindrical steel product as of the uniform as well as variable cross section. It is shown that the regions of the products of the complex cross-section located at the minimal distance to the helix inductor are exposed to highest level of hardening. It is necessary to increase the current pulse in the inductor or to use a split inductor with the variable inner diameter repeating the product profile for hardening of the product regions located at large distances from inductor. The side surfaces of protrusions that are perpendicular to the axis of the system are not exposed to hardening due to the low gradient of the energy density of magnetic field near its surface. In the case of close proximity of the protrusions (for distance less than 1 cm), the material on the product surface in the space between protrusions is not exposedto sufficient hardening.

About the Authors

A. V. Alifanov
Physical-Engineering Institute of National Academy of Sciences of Belarus
Belarus
Minsk, 10, Kuprevicha str.


D. A. Tsionenko
Belarusian State University of Informatics and Radioelectronics
Belarus

Minsk, 6, P. Brovki str.



A. M. Miliukova
Physical-Engineering Institute of National Academy of Sciences of Belarus
Belarus
Minsk, 10, Kuprevicha str.


A. I. Harchanin
Physical-Engineering Institute of National Academy of Sciences of Belarus
Belarus
Minsk, 10, Kuprevicha str.


V. V. Maleronak
Baranovichi State University
Belarus
Baranovichi City, 21, Voikova str.


References

1. Alifanov A. V., Popova Zh. A., Tsionenko N. M. Mehanizm uprochnenija legirovannyh stalej v impul’snom magnitnom pole

2. [The mechanism of hardening of alloyed steels in impulse magnetic field]. Lit’e i metallurgija = Foundry production and metallurgy, 2012, no. 4, pp. 151–155.

3. Malygin B. V. Magnitnoe uprochnenie instrumentov i detalej mashin [Magnetic hardening of tools and machine parts]. Moscow, Mashinostroenie Publ., 1998, 130 p.

4. Alifanov A. V., Tsionenko D. A., Miljukova A. M., Tsionenko N. M. Magnitostrikcionnyj mehanizm obrazovanija melkodispersnoj struktury v stal’nyh izdelijah pri magnitno-impul’snom vozdejstvii [Magnetostrictive mechanism of the formation of a fine-dispersed structure in steel products under magnetic-pulse action]. Vesti NAN Belarusi, Ser. fіz.-mat. navuk = Proceedings of the National Academy of Sciences of Belarus. Ser. fiz.-mat. Sciences, 2016, no. 4, pp. 31–36.

5. Alifanov A. Modeling of non-stationary diffusion of alloying elements on exposure of steel samples to magnetic pulses. A. Miliukova, Zh. Popova, D. Tsionenko. 15-th International Scientific Conference – «TRANSFER 2014». Alexander Dubcek University of Trencin, 23–24.10.2014, Trencin, Slovakija. Р. 10–14.

6. Impul’snye metody obrabotki materialov [Impulse methods of processing materials]. Minsk, Nauka i tehnika Publ., 1977, 216 p.

7. Alifanov A. V., Akulov A. V., Popova Zh. A., Demjanchik A. S. Raschet davlenij v sisteme «induktor-zagotovka» pri magnitno-impul’snoj obrabotke metallov [Calculation of pressures in the «inductor-billet» system for magnetic-pulse processing of metals]. Vestnik BarGU. Ser. fiz.-mat. nauk. Tehn. Nauki = Bulletin of the BarGU. Ser. fiz.-mat. Sciences. Techn. Science, 2013, vyp. 1(4), pp. 31–37.


Review

For citations:


Alifanov A.V., Tsionenko D.A., Miliukova A.M., Harchanin A.I., Maleronak V.V. SPECIAL FEATURES OF MAGNETIC PULSE HARDENING PROCESSING OF STEEL CYLINDRICAL PRODUCTS OF VARIABLE CROSS-SECTION. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2017;(2):88-96. (In Russ.) https://doi.org/10.21122/1683-6065-2017-2-88-96

Views: 698


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 1683-6065 (Print)
ISSN 2414-0406 (Online)