OPTIMIZATION OF TEMPERATURE HARDENING FOR IMPROVING THE HEAT RESISTANCE OF TOOL STEEL 4X5MФ1С IN VARIOUS WORKPIECES Part 1. INFLUENCE OF HEATING TEMPERATURE 1040 °С IN THE OIL HARDENING AND HARDERING ON THE HARDNESS AND STRUCTURE OF FORGINGS AND CASTINGS MADE OF STEEL 4X5MФ1C
https://doi.org/10.21122/1683-6065-2017-2-97-103
Abstract
Influence of the oil quenching temperature with the heating 1040 °С near 1 hour of tool steel 4X5МФ1С forgings and castings on the microstructure and the ability to hardening after high temperature tempering at 500–650 °C for 1, 5 hours. It was shown that increase of hardening level in comparison with the required index has not been achieved.
About the Author
V. N. Fedulov
Belarusian National Technical University
Belarus
Minsk, 65, Nezavisimosti ave.
Belarus
Minsk, 65, Nezavisimosti ave.
References
1. Fedulov V. N. Puti povyshenija stojkosti vysokonagruzhennogo instrumenta gorjachej vysadki golovok boltov [Methods of increasing the resistance of a heavily hot tool landing bolt heads]. Lit’e i metallurgija = Foundry production and metallurgy, 2016, no. 1, pp. 120–129.
2. Gur’ev A. M. B Haraev Ju. P., Koljadin A. A., Shametkina O. V. Litye shtampy dlja gorjachego obemnogo deformirovanija i osobennosti ih termicheskoj i himiko-termicheskoj obrabotki [Cast dies for hot volumetric deformation and features of their thermal and chemical-thermal processing.]. Litejnoe proizvodstvo = Foundry, 2004, no. 1., pp. 8–11.
3. Poznjak L. A., Skrynchenko Ju. M., Tishaev S. I. Shtampovye stali [Stamping steel]. Moscow, Metallurgija Publ., 1980, 150 p.
4. Fedulov V. N. Vlijanie uslovij ohlazhdenija i razmera zagotovki pri lit’e instrumental’noj stali na sposobnost’ k posledujushhemu termicheskomu uprochneniju poverhnosti [Influence of cooling conditions and the size of stock material during casting of tool steel on capability to the subsequent thermal hard-facing]. Lit’e i metallurgija = Foundry production and metallurgy, 2016, no. 3, pp. 117–127.
Review
For citations:
Fedulov V.N. OPTIMIZATION OF TEMPERATURE HARDENING FOR IMPROVING THE HEAT RESISTANCE OF TOOL STEEL 4X5MФ1С IN VARIOUS WORKPIECES Part 1. INFLUENCE OF HEATING TEMPERATURE 1040 °С IN THE OIL HARDENING AND HARDERING ON THE HARDNESS AND STRUCTURE OF FORGINGS AND CASTINGS MADE OF STEEL 4X5MФ1C. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2017;(2):97-103. (In Russ.) https://doi.org/10.21122/1683-6065-2017-2-97-103
Views:
2367
Email this article 