DEVELOPMENT EXPERIENCE OF UNIVERSITY SCIENCE IN THE PROVINCE
https://doi.org/10.21122/1683-6065-2017-2-109-116
Abstract
The establishment of the University science sector in the province is considered in terms of Center of powder metallurgy in the Gorky Polytechnical Institute (Nizhny Novgorod State Technical University – NNSTU). The participation of scientists of NNSTU on basis of the experience in theoretical and practical research in the field of powder metallurgy derived in the Soviet period is shown in the development and introduction of advanced industry technologies in the region and the country, including the activities in the Vyksa metallurgical plant.
About the Authors
V. K. SorokinRussian Federation
Nizhny Novgorod, 24, Mininа str.
T. I. Akimova
Russian Federation
Nizhny Novgorod, 24, Mininа str.
References
1. Poroshcovaja metallurgija v SSSR. Estoreja. Sovremennoe sostojanie. Perspectivy. (1986) [Powder metallurgy in USSR. History. The contemporary condition. Perspectives] Red. I. N. Frantsevych, V. I. Trefilov. Moscow. (In Russ.).
2. Roman O. V. Razvitie poroshkovoj met’allurgii za 40 let // 40 let laboratorii poroshkovyh metallov v Respubliki Belarus’ / Red. kol. E. A. Doroshkevich (gl. red.) i dr. [The development of powder metallurgy for 40 years // 40 years of powder metals laboratory in the Republic of Belarus / red. count. E. A. Darashkevich (ch), etc.]. Minsk, 2000, pp. 4–29.
3. Serdjuk G. G., Chernyshev L. I. Razvitie porochcovoi metallurgii v Ukraine [Development of powder metallurgy Ukraine]. Available at: http://www.science.by/upload/iblock/663/663783ad3f75d332db5ad9dccd6319ca.pdf (accessed 15 December 2014) (In Russ.).
4. Poroshcovaja metallurgija. Materialy, tehnologii, svojstva, oblasti primenenija. (1985) [Powder metallurgy. Materials, technology, properties, applications]. Ed. I. M. Fedorchenko. Kiev. (In Russ.).
5. Central‘nyi archiv Nizegorodskoi oblasti [Central archive of the Nizhniy Novgorod region] F. 2464. Op. 9а. С. 3. Р. 3. (In Russ.).
6. Central‘nyi archiv Nizegorodskoi oblasti [Central archive of the Nizhniy Novgorod region] F. 2464. Оp. 9а. C. 3. P. 5. (In Russ.).
7. Blagin V. I. (1966). Sostojanie eksperimental’nyh issledovatel’skih rabot i vnedrenie tehnologii poroshcovoj metallurgii [Status of experimental and research works and introduction of technology of powder metallurgy automobile production]. Porochcovay metallurgiy [Powder metallurgy]. Minsk, pp. 361–363. (In Russ.)
8. Aksenov G. I., Sorokin V. K. (1955). Nauglerozhivajushhee spekanie zhelezokeramicheskih izdelij [Nauglerozhivajushhee zhelezokeramicheskih bonding products]. Porochcovay metallurgiy [Powder metallurgy]. Moscow, Iss. 2, pp. 45–53. (In Russ.).
9. Bannikova N. F. (2006) Iz istorii stanjvleney Kuibuchevskogo feleala nauchno-essledovatelscogo instituta aveazionnuh materialov (1959–1965) [From history of the Kuibyshev branch of the Research Institute of aviation materials (1959–1965)]. Izvestiy Samarscogo nauchnogo zentra Rossiyskoi akademii nauk = News of the Samara scientific centre of Russian Academy of Sciences. Samara. T. 8, no. 3, pp. 815–823. (In Russ.).
10. Semenov Y. N. (1961). Poristue metallichescie plastinu dly izgotovleniy filtrov. [Porous metal plates for manufacturing filters]. Nauchno-tehnicheskii sbornik = Scientific and technical collection. Gorky, Iss. 1, pp. 59–66. (In Russ.).
11. Sorokin V. K. (1961). Izgotovlenie tonkih vysokoporistyh plastin iz nerzhavejushhej stali metodom poocshkovoj metallurgii [Manufacturing fine-porous plates stainless steel by powder metallurgy]. Peredovoj nauchno-tehnicheskij i proizvodstvennyj opyt = Advanced scientific, technological and industrial experience. Tema 2. No М-61-177/1 [Topic 2. № M-61-177/1]. Izgotovlenie detalej metodom poroshkovoj metallurgi [Production of parts using powder metallurgy]. Moscow, Iss. 1, pp. 1–5. (In Russ.).
12. Khromov V. G. (1963). Poluchenie vysokoplasticnogo titana prokatkoj poroshka [Getting high-ductility titanium rolling powder]. Vsesojuznoj mezhvuzovskoj konferencii «Porochkovaja metallurgija» = Vsesojuz. hunting rituals. conference «Powder metallurgy». Kuibyshev aviation. Inst. Kuybyshev, Iss. 16, pp. 93–105. (In Russ.).
13. Nikolaev A. N., Hrenov V. A. (1973) [Rolling and sintering of powder sprayed stainless steel] Trudy Vsesojuznogo nauchno-tehnecheskoj konferencii po metallokeramicheskim materialam i izhdelijam. Erevan. Trudy Vsesojuz. scientific-technical conference on metallokeramicheskim materials and products. Yerevan Polytechnic. Inst. Yerevan. (In Russ.).
14. Sorokin V. K. (1976). [Filtering baffle from porous titanium sheets]. Chimicheskoe i neftjanoe mashinostroenie = Chemical and petroleum engineering. Moscow, no. 5, pp. 46–47. (In Russ.).
15. Shmelev L. S. (2007). Istorija sozdanja opyto-promyshlennogo proizvodstva pokata meallicheskih poroshkov na Vyksunsom ordena Lenina metalluricheskom zavode [History of creation of experimental-industrial production of rolled metal powders at Vyksunsky metallurgic plant, the order of Lenin]. Vyksa, 44 p.
16. Paryshev V. M., Shotkin Ja. A. (1975) Issledovanie prokatki poroshkovyh smesej v vide tverdoj smazki [Study rolling powder mixtures with a filler in the form of solid lubricants]. Poroshkovja metallurgja = Powder metallurgy. no. 10, pp. 9–13. (In Russ.).
17. Astrov E. I., Nikolaev A. N., Hromov V. G., Fjodorov V. V. (1978). Poluchenie bimetallicheskih stalebronzovyh zagotovok dlja podshipnikov skol’zhenija bol’shih razmerov [Getting bimetallic billets used for bearings of large sizes]. Antifrikcionnye i frikcionnye materialy = Antifrictional and frictional materials. Kiev.
18. Postanovlenie Soveta Ministrov SSSR on 12.04.1956 no. 456 [Decision of the Council of Ministers of the USSR from 12.04.1956 № 456]. «O merah uluchseniy nauchno-essledovatelskoi rabotu v vuscheh uchebnux zavedeniyh».[«On the measures of improving the scientific research work in higher educational institutions]. Information online system TEHNORMA. RU. Available at: http://www.tehnorma. ru (accessed 15 December 2014). (In Russ.).
Review
For citations:
Sorokin V.K., Akimova T.I. DEVELOPMENT EXPERIENCE OF UNIVERSITY SCIENCE IN THE PROVINCE. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2017;(2):109-116. (In Russ.) https://doi.org/10.21122/1683-6065-2017-2-109-116