MANAGEMENT OF THE SLAG AJUSTMENT IN ARC FURNACES
https://doi.org/10.21122/1683-6065-2017-4-48-52
Abstract
The slag adjustment during steel smelting in arc steelmaking furnaces, the conditions for sponging and the gas load at different amounts of supplied oxygen and the various contents of carbon in the melt were considered. The amount of blown carbon-containing materials in the steelmaking bath is determined.
About the Authors
S. V. Korneev
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
I. A. Trusova
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
References
1. Кеm А. Yu., Каzаrcev V. О., Меrker Je. Je., Charlamov D. А. K voprosu ob optimizacii vyplavki stali v dugovoj pechi i ejo vnepechnoj obrabotki v agregate kovsh¬pech’ [On the optimization of steel smelting in an arc furnace and its out¬of¬furnace treatment in a ladle¬furnace unit]. Vestnik DGTU = Vestnik DGTU, 2014, Vol. 14, no. 2 (77), pp. 66–73.
2. Ajzatulov R. S., Harlashin P. S., Protopopov E. V., Nazjuta L. Ju. Teoreticheskie osnovy staleplavil’nyh processov [Theoretical foundations of steelmaking processes]. Moscow, MISIS Publ., 2002, 320 p.
3. Fomenko A. P., Jenders V. V., Jakshuk D. S., Lejnveber E. I., D’jachenko Ju. V. Issledovanie tehnologicheskih processov vyplavki kordovoj stali sverhmoshhnoj dugovoj pechi [Investigation of technological processes of melting cad steel of a super¬powerful arc furnace]. Stal’ = Steel, 2000, no. 5, pp. 35–37.
4. Bigeev V. A., Malofeev A. E., Panteleev A. V., Fedjanin A. N., Brusnikova A. V. Okislennost’ shlaka sovremennoj dugovoj st jelektropechi [Oxidation of the slag of the modern arc st -making electric furnace]. Vest JuUrGU, serija «Metallurgija = Vestnik SUSU, series «Metallurgy», 2010, Vyp. 15, no. 34.
Review
For citations:
Korneev S.V., Trusova I.A. MANAGEMENT OF THE SLAG AJUSTMENT IN ARC FURNACES. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2017;(4):48-52. (In Russ.) https://doi.org/10.21122/1683-6065-2017-4-48-52
Views:
520
Email this article 