RECYCLING OF FERROUS METAL SHAVINGS
https://doi.org/10.21122/1683-6065-2017-4-94-101
Abstract
The most advanced and universal way of chips recycling of ferrous metals is the technology of direct chips remelting in rotational tilting furnaces (RBF) directly at the enterprises-sources of waste generation. However common practice of iron and steel chips recycling is based on its briquetting and subsequent remelting in traditional furnaces.
For cost reduction when chip briquetting and organization of hot briquetting sections in places of its formation highly efficient equipment – rotational dryer and RBF is proposed. The possibility and effectiveness of developed furnaces for lowand high-temperature chip heating in briquetting lines is proved. Thermal efficiency of such furnaces when dispersed materials heating is much higher than drum or feed-through furnaces. Hot briquetting of shavings reduces the pressing force, which reduces the specific energy consumption. The use of rotary kilns can reduce technological operations and equipment of production sites for the manufacture of briquettes
About the Authors
S. L. Rovin
Technolit Co
Belarus
Minsk, Belarus, 24, Kolasa str.
Belarus
Minsk, Belarus, 24, Kolasa str.
L. E. Rovin
Pavel Sukhoi State Technical University of Gomel
Belarus
Gomel, Belarus, 48, Octyabrya ave.
Belarus
Gomel, Belarus, 48, Octyabrya ave.
T. M. Zayac
Pavel Sukhoi State Technical University of Gomel
Belarus
Gomel, Belarus, 48, Octyabrya ave.
Belarus
Gomel, Belarus, 48, Octyabrya ave.
O. M. Valickaya
Pavel Sukhoi State Technical University of Gomel
Belarus
Gomel, Belarus, 48, Octyabrya ave.
Belarus
Gomel, Belarus, 48, Octyabrya ave.
References
1. Dyakonov O. M. Kompleksnaya pererabotka struzhki i metallosoderzhashchih shlamov [Complex processing of metal shavings and sludge]. Minsk, Tekhnologiya Publ., 2012, 262 p.
2. Garost A. I. Ispol’zovanie zamaslennoy chugunnoy struzhki dlya zameny dorogostoyashchego deficitnogo loma [The use of oily cast iron chips to replace the expensive scarce scrap]. Lit’e i metallurgiya = Foundry production and metallurgy, 2012, no. 2, pp. 17–26.
3. Steblov A. B., German M. L. Pererabotka struzhki chernyh metallov [Processing of ferrous metal shavings]. Rynok vtorichnyh metallov = Secondary market, 2007, no. 1/39, pp. 46–49.
4. Terleckiy S. V. O nekotoryh problemah pererabotki struzhki v sovremennyh dugovyh staleplavil’nyh pechah [Some problems of processing chips in modern arc steel-melting furnaces]. Lit’e i metallurgiya = Foundry production and metallurgy, 2005, no. 3, pp. 76–78.
5. Rovin S. L. Recikling metalloothodov v rotacionnyh pechah [Recycling of metal wastes in rotary furnaces]. Minsk, BNTU Publ., 2015, 382 p.
6. Rovin L. E., Valickaya O. M., Rovin S. L. Rotacionnaya ustanovka dlya termoobrabotki i plavki dispersnyh i kuskovyh materialov [Rotary device for heat treatment and melting of the dispersed and bulk materials]. Patent RB, no. 1424, MPK F27B 7/00.
7. Rovin L. E., Valickaya O. M., Rovin S. L. Rotacionnaya kachayushchayasya ustanovka dlya termoobrabotki i plavki dispersnyh i kuskovyh materialov [Rotary tilting device for heat treatment and melting of the dispersed and bulk materials]. Patent RB, no. 1732, MPK F27B 7/00
8. Rovin L. E., Valickaya O. M., Rovin S. L. Rotacionnaya ustanovka dlya termoobrabotki i sushki dispersnyh i kuskovyh materialov [The rotary device for heat treatment and drying of dispersed and bulk materials]. Patent RB, no. 2428, MPK F27B 7/00.
9. Rovin L. E., Valickaya O. M., Rovin S. L. Rotacionnaya ustanovka dlya plavki dispersnyh i kuskovyh materialov [Rotary device for melting dispersed and bulk materials]. Patent RB, no. 2770, MPK F27B 7/00.
10. Rovin S. L., Matyushenko V. M., Valickaya O. M. Chugunnaya struzhka kak shihtovoy material [The use of iron shavings as charge]. Lit’e i metallurgiya = Foundry production and metallurgy, 2008, no. 3, pp. 158–161.
11. Zhdanovich G. M. Teoriya pressovaniya metallicheskih poroshkov [Theory of pressing of metal powders]. Moscow, Metallurgiya Publ., 1969, 264 p.
Review
For citations:
Rovin S.L., Rovin L.E., Zayac T.M., Valickaya O.M. RECYCLING OF FERROUS METAL SHAVINGS. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2017;(4):94-101. (In Russ.) https://doi.org/10.21122/1683-6065-2017-4-94-101
Views:
1079
Email this article 