WASTELESS TECHNOLOGY OF PROCESSING OF ALUMINUM CHIPS AND SLAGS IN A SHORT-FLAME ROTARY FURNACE
https://doi.org/10.21122/1683-6065-2017-4-109-118
Abstract
The paper presents the results of research on the melting of aluminum chips and slag in a short-flame rotary furnace. Variants of the use of secondary waste products for out-of-furnace treatment of steel in the form of deoxidizers and diluents of refining slag are suggested.
About the Authors
L. V. Tribushevskiy
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosty ave.
Belarus
Minsk, Belarus, 65, Nezavisimosty ave.
B. M. Nemenenok
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosty ave.
Belarus
Minsk, Belarus, 65, Nezavisimosty ave.
G. A. Rumiantsеva
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosty ave.
Belarus
Minsk, Belarus, 65, Nezavisimosty ave.
I. А. Gorbel
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosty ave.
Belarus
Minsk, Belarus, 65, Nezavisimosty ave.
References
1. Gogin V. B., Shadayev D. A. Sovremennye napravleniya razvitiya tekhnologii retsyklinga alyuminiya (po materialam 3-y konferentsii «Retsikling alyuminiya» [Modern trends in the development of aluminum recycling technology]. Tekhnologiya legkikh splavov = Technology of light alloys. 2006, no 4, pp. 101–118.
2. Tribushevskiy L. V., Nemenenok B. M., Rumyantseva G. A., Rimoshevskiy V. S. Analiz protsessa plavki alyuminievoy struzhki i shlaka v korotkoplamennoy rotornoy pechi [The analysis of process of meltiung of aluminium shaving and slag in the shortflame rotor furnace]. Lit`e i metallurgiya = Foundry production and metallurgy, 2015, no 2, pp. 42–48.
3. Tribushevskiy L. V., Nemenenok B. M., Rumjantseva G. A., Gorbel I. A. Vliyanie sostava shikhty na sebestoimost poluchaemogo splava pri plavke v korotkoplamennoy rotornoy pechi [Influence of the composition of the charge on the cost of the resulting alloy during melting in a short-flame rotary furnace]. Metallurgija: Respyblikanskiy mezhvedomstvennyi sbornik nauchnyh trudov = Metallurgy: Republican interdepartmental collection of scientific works, Minsk, BNTU Publ., 2015, vyp.36, pp.151–158.
4. Leont`ev L. I., Ponomarev V. I., Sheshukov O. Yu. Pererabotka i utilizatsija tekhnogennykh otkhodov metallurgicheskogo proizvodstva [Processing and utilization of industrial wastes of metallurgical production]. Ekologija i promyshlennost Rossii = Ecology and industry of Russia, 2016, vol.20, no 3, pp. 24–27.
5. Kudrin V. A. Teorija i tekhnologija proizvodstva stali [Theory and technology of steel production]. Moscow, Mir Publ., 2003. 528 p.
6. Dyudkin D. A., Bat S. Yu., Grinberg S. E., Marintsev S. N. Proizvodstvo stali na agregate «kovsh-pech» [Steel production on the ladle furnace unit]. Donetsk, OOO «Yugo-Vostok, LTD» Publ., 2003. 300 p.
7. Agapitov E. V., Bigeev V. A., Erofeev M. M., Pokataeva M. A. Protsessy desylfuratsii v agregate pech-kovsh s polymielektrodami [Desulphurization processes in a ladle furnace with hollow electrodes]. Stal = Steel, 2008, no 8, pp. 37–40.
8. Rumjantseva G. A., Nemenenok B. M., Tribushevskiy L. V., Gorbel I. A. Magnezialnye flyusy i osobennosti ikh ispolzovanija pri plavke stali [Magnesia fluxes and features of their use in the melting of steel]. Metallurgiya: Respublicanskij mezhvedomstvennyi sbornik nauchnyh trudov = Metallurgy: Republican interdepartmental collection of scientific works, Minsk, BNTU Publ., 2016, vyp. 37, pp. 31–37.
9. Bobkova N. M. Fizicheskaja khimija tugoplavkikh nemetallicheskikh i silikatnykh materialov [Physical chemistry of refractory nonmetallic and silicate materials]. Minsk, Vysheyshaja shkola Publ., 2007, 301 p.
10. Voskoboynikov V. G., Kudrin V. A., Jakushev A. M. Obshchaja metallurgija [General Metallurgy]. Moscow, IKTS «Akademkniga», Publ., 2005. 768 p.
11. Metelkin A. A., Sheshukov O. Yu., Nekrasov I. V., Shevchenko O. I. Povyshenie stoykosti futerovki agregatov vnepechnoy obrabotki stali [Increasing the lining stability of the out-of-furnace steel treatment units]. Nizhniy Tagil: NTI UrFU Publ., 2015. 144 p.
12. Dyudkin D. A., Kisilenko V. V., Bat S. V. Sovershenstvovanie tekhnologii ispolzovanija poroshkovykh provolok v metallyrgii stali [Perfection of the technology of the use of powder wires in metallurgy of steel]. Stal = Steel,2007, no 8, pp. 25–29.
Review
For citations:
Tribushevskiy L.V., Nemenenok B.M., Rumiantsеva G.A., Gorbel I.А. WASTELESS TECHNOLOGY OF PROCESSING OF ALUMINUM CHIPS AND SLAGS IN A SHORT-FLAME ROTARY FURNACE. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2017;(4):109-118. (In Russ.) https://doi.org/10.21122/1683-6065-2017-4-109-118
Views:
626
Email this article 