INVESTIGATION OF CARBON INFLUENCE IN CROMIUMIUM CAST IRONS FOR FORMING CASTINGS IN SAND AND COMBINED MOLDS
https://doi.org/10.21122/1683-6065-2018-1-41-46
Abstract
The results of research to determine the influence of the amount of carbon in chromium cast irons on the formation of castings in sand and combined molds are described in the article. Experimental studies were carried out with casting samples from wearresistant cromium cast iron with different carbon contents. The microstructure of the obtained samples is presented, and its analysis is performed. Numerical studies have been carried out to evaluate the effect of the carbon content on the dynamics and kinetics of hardening of castings in sand and combined molds. The influence of the carbon content on the hardening process of cromium cast iron castings during foundry casting in sand and combined molds is established. The results of the research were used for the manufacture parts of crushing and grinding equipment.
About the Authors
E. I. Marukovich
Institute of Tehnology of Metals of National Academy of Sciences of Belaru
Belarus
Mogilev, Belarus, 11, Byalynitskogo-Biruli str.
Belarus
Mogilev, Belarus, 11, Byalynitskogo-Biruli str.
V. M. Iljushenko
Institute of Tehnology of Metals of National Academy of Sciences of Belaru
Belarus
Mogilev, Belarus, 11, Byalynitskogo-Biruli str.
Belarus
Mogilev, Belarus, 11, Byalynitskogo-Biruli str.
V. A. Pumpur
Institute of Tehnology of Metals of National Academy of Sciences of Belaru
Belarus
Mogilev, Belarus, 11, Byalynitskogo-Biruli str.
Belarus
Mogilev, Belarus, 11, Byalynitskogo-Biruli str.
V. M. Andrienko
Institute of Tehnology of Metals of National Academy of Sciences of Belaru
Belarus
Mogilev, Belarus, 11, Byalynitskogo-Biruli str.
Belarus
Mogilev, Belarus, 11, Byalynitskogo-Biruli str.
References
1. Garber M. E. Iznosostoykie belye chuguny: svoystva, structura, tekhnologiya, ekspluatatsiya [Wear-resistant white cast iron: properties, structure, technology, operation]. Мoscow, Мashinostroenie Publ., 2010. 280 p.
2. Netrebko V. V. Vliyanie himicheskogo sostava vysokohromistykh chugunov na obrabatyvaemost rezaniem [Influence of the chemical composition of high-chromium iron on machinability by cutting]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu = Bulletin of Dnepropetrovsk National University of Railnay Transport, 2016, no. 1 (61), pp. 122–128.
3. Kolokolcev V. M., Molochkov P. P., Vorobyov B. S., Murahtin A. V., Voronkov B. V. Povyshenie ekspluatatsionnykh svoystv otlivok detaley tsentrobezhnykh nasosov [Increase of operational properties of castings of parts of centrifugal pumps]. Liteynoe proizvodstvo = Foundry production, 2014, no. 1, pp. 14–18.
4. Baranovsky E. F., Pumpur V. A., Iljushenko V. M., Baranovsky K. E. Zatverdevanie otlivok iz iznosostoykikh chugunov pri litje v kokil, peschanuyu i kombinirovannuyu formy [Solidification of castings made of wear-resistant cast iron in the casting mold casting, sand and combined forms]. Liteynoe proizvodstvo = Foundry production, 2011, no. 2, pp. 19–23.
Review
For citations:
Marukovich E.I., Iljushenko V.M., Pumpur V.A., Andrienko V.M. INVESTIGATION OF CARBON INFLUENCE IN CROMIUMIUM CAST IRONS FOR FORMING CASTINGS IN SAND AND COMBINED MOLDS. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2018;(1):41-46. (In Russ.) https://doi.org/10.21122/1683-6065-2018-1-41-46
Views:
2120
Email this article 