THE IMPACT OF CHEMICAL COMPOSITION ON MECHANICAL PROPERTIES OF THE ALLOYED STEEL
https://doi.org/10.21122/1683-6065-2018-1-120-123
Abstract
Based on mathematical and physicochemical modeling a studied the effect of alloying elements (chromium, molybdenum, vanadium) in the formation of the mechanical properties of steel. The intervals of the content of alloying elements that ensure the fulfillment of the required norms are determined. Dependences of the change in the mechanical properties of doped rolled steel from the index of the structural state d are constructed.
About the Authors
V. A. Lutsenko
Iron and Steel Institute of NAS Ukraine
Ukraine
Dnepr City, Ukraine, 1, Starodubov area.
Ukraine
Dnepr City, Ukraine, 1, Starodubov area.
T. N. Golubenko
Iron and Steel Institute of NAS Ukraine
Ukraine
Dnepr City, Ukraine, 1, Starodubov area.
Ukraine
Dnepr City, Ukraine, 1, Starodubov area.
O. V. Lutsenko
Iron and Steel Institute of NAS Ukraine
Ukraine
Dnepr City, Ukraine, 1, Starodubov area.
Ukraine
Dnepr City, Ukraine, 1, Starodubov area.
A. S. Kozachek
Iron and Steel Institute of NAS Ukraine
Ukraine
Dnepr City, Ukraine, 1, Starodubov area.
Ukraine
Dnepr City, Ukraine, 1, Starodubov area.
N. A. Glazunova
BSW - management company of "BMC" holding
Belarus
Belarus
References
1. Guljaev A. P. Metallovedenie [Metallurgy]. Moscow, Metallurgija Publ., 1986, 542 p.
2. Mes’kin V. S. Osnovy legirovanija stali [Fundamentals of alloying steel]. Moscow, Metallurgija Publ., 1964, 685 p.
3. Gudremon Е. Special’nye st [Special st Moscow, Metallurgija Publ., 1966, 1274 p.
4. Prihod’ko Е. V., Togobickaja D. N. Fiziko-himicheskoe modelirovanie processov mezhatomnogo vzaimodejstvija v metallurgicheskih rasplavah [Physico-chemical modeling of the processes of interatomic interaction in metallurgical melts]. GVUZ «Priazovskij gosudarstvennyj tehnicheskij universitet» = GVUZ «Priazovsky State Technical University», 1999, no. 7, pp. 72–83.
5. Prihod’ko Е. V., Togobickaja D. N., Kozachek A. S. Informacionno-matematicheskoe obespechenie ocenki vlijanija himicheskogo sostava na svojstva gotovogo prokata [Information and mathematical support of the assessment of the effect of the chemical composition on the properties of finished rolled products]. Sistemnye tehnologii. Regional’nyj mezhvuzovskij sbornik nauchnyh rabot = System technologies. Regional interuniversity collection of scientific works. Dnepropetrovsk, 2010, pp. 33–39.
6. Togobickaja D. N., Piptjuk V. P., Logozinskij I. N. Sistemnyj podhod k vyboru optimal’nogo jelementnogo sostava stali, obespechivajushhego trebuemyj uroven’ mehanicheskih svojstv [System approach to the choice of the optimal elemental composition of steel, which provides the required level of mechanical properties]. Sist tehnologii. Regional’nyj mezhvuzovskij sbornik nauchnyh rabot = System technologies. Regional interuniversity collection of scientific works. Dnepropetrovsk, 2015, pp. 91–97.
7. Togobickaja D. N., Piptjuk V. P., Logozinskij I. N. Optimizacija himicheskogo sostava stali 14H17N2 na osnove koncepcii napravlennoj himicheskoj svjazi [Optimization of the chemical composition of 14Х17Н2 steel on the basis of the concept of directional chemical bonding]. Fundamental’nye i prikladnye problemy chernoj metallurgii [Fundamental and applied problems of ferrous metallurgy]. Dnepropetrovsk: «Vіzіon» Publ., 2015, vyp. 30б, pp. 312–323.
Review
For citations:
Lutsenko V.A., Golubenko T.N., Lutsenko O.V., Kozachek A.S., Glazunova N.A. THE IMPACT OF CHEMICAL COMPOSITION ON MECHANICAL PROPERTIES OF THE ALLOYED STEEL. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2018;(1):120-123. (In Russ.) https://doi.org/10.21122/1683-6065-2018-1-120-123
Views:
2304
Email this article 