COLD MIXTURE OF INORGANIC BINDER: STATUS AND PROSPECTS OF DEVELOPMENT (INORGANIC VS. ORGANIC)
https://doi.org/10.21122/1683-6065-2018-2-16-22
Abstract
The technologies of molding from cold-hardening mixtures based on organic resins and inorganic metal phosphate binders are compared. The use of the latter is preferable for a number of technological indicators. Also, without additional investments, the problem of labor and environmental protection is completely solved.
About the Authors
S. S. Tkachenko
Association of Foundres of St. Petersburg and Leningrad region,
Russian Federation
St. Peterburg, 45A, Sampsonievsky pr.
Russian Federation
St. Peterburg, 45A, Sampsonievsky pr.
G. A. Kolodiy
Association of Foundres of St. Petersburg and Leningrad region,
Russian Federation
St. Peterburg, 45A, Sampsonievsky pr.
Russian Federation
St. Peterburg, 45A, Sampsonievsky pr.
L. G. Znamensky
South-Ural State University
Russian Federation
Chelyabinsk
Russian Federation
Chelyabinsk
A. A. Ermolenko
Завод специальной химии
Russian Federation
Chelyabinsk
Russian Federation
Chelyabinsk
References
1. Tehnologija litejnogo proizvodstva: lit’jo v peschanye formy [Technology of foundry: Casting in sand molds.]. Moscow, Izdatel’skij centr «Akademija» Publ., 2005, 113 p.
2. Tehnologija litejnogo proizvodstva: formovochnye i sterzhnevye smesi [Foundry technology: Molding and core mixtures]. Brjansk, BGTU Publ., 2002, 184 p.
3. Metallofosfatnye svjazujushhie i smesi [Metallophosphate binders and mixtures]. Cheboksary, Chuvashskij universitet Publ., 1995, 524 p.
4. Sudakas L. G. Fosfatnye vjazhushhie sistemy [Phosphate binders]. Sankt-Peterburg, RIA «Kvintet» Publ., 2008, pp. 141, 249.
5. Kolodij G. A., Tkachenko S. S., Krivickij V. S. Perspektiva primenenija fosfatnyh holodnotverdejushhih smesej [The prospect of using phosphate cold-hardening mixtures]. Litejshhik Rossii Foundry of Russia, 2004, no. 8, pp. 23–24.
6. Znamenskij L. G., Ivochkina O. V., Varlamov A. S., Franchuk A. N., Juzhakova A. A. Otechestvennye kraski dlja lit’ja po gazificiruemym modeljam [Domestic paints for casting gasified models]. Vestnik JuUrGU. Serija «Metallurgija» Bulluten JuUrGU. Series «Metallurgy», 2017, Vol. 17, no. 1, pp. 58–64.
7. Krasnyj B. L. Ogneupornye i stroitel’nye materialy na osnove fosfatnyh svjazujushhih. Diss. dokt. techn. nauk [Refractory and building materials based on phosphate binders. Dr. techn. Sci. diss.]. Moscow. 116 p.
8. Znamenskij L. G., Vercjuh S. S., Varlamov A. S., Sudarikov M. V. Korundovye formy na aljumoborfosfatnom koncentrate v tochnom lit’e [Corundum forms on aluminoborhosphate concentrate in precise casting]. Vestnik JuUrGU Bulluten JuUrGU, 2012, no. 39.
9. Znamenskij L. G., Ivochkina O. V., Kulakov B. A., Krymskij V. V. Jelektroimpul’snaja i ul’trazvukovaja obrabotka materialov v tochnom lit’e [Electropulse and ultrasonic treatment of materials in precise casting]. Cheljabinsk, izdatel’skij centr JuUrGU Publ., 2010, 259 p.
10. Dibrov I. A. Sostojanie i perspektivnye tehnologii litejnogo proizvodstva Rossii [Status and perspective technologies of foundry production in Russia]. Litejshhik Rossii Foundry of Russia, 2013, no. 9.
11. Boldin A. N., Davydov N. I., Zhukovskij S. S. Litejnye formovochnye materialy. Formovochnye sterzhnevye smesi i pokrytija [Foundry molding materials. Molded core mixtures and coatings]. Moscow, Mashinostroenie Publ., 2006, 230 p.
Review
For citations:
Tkachenko S.S., Kolodiy G.A., Znamensky L.G., Ermolenko A.A. COLD MIXTURE OF INORGANIC BINDER: STATUS AND PROSPECTS OF DEVELOPMENT (INORGANIC VS. ORGANIC). Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2018;(2):16-22. (In Russ.) https://doi.org/10.21122/1683-6065-2018-2-16-22
Views:
764
Email this article 