Reo- and thixocompacting - new approaches to casting of materials in hard-fluid state
Abstract
There are offered and examined the two new methods of casting in solid-liquid state—reo- and thixocompacting- useful for casting with the fixed fusion point. There are determined the conditions of these methods realization and experimentally analyzed on the model substances the processes and structure peculiarities of the produced casts.
About the Authors
N. K. Tolochko
Institute of Technical Acoustics of NAS of Belarus
Belarus
Belarus
Ju. A. Shienok
Institute of Technical Acoustics of NAS of Belarus
Belarus
Belarus
A. Z., Mjaldun
Institute of Technical Acoustics of NAS of Belarus
Belarus
Belarus
S. E. Mozzharov
Institute of Technical Acoustics of NAS of Belarus
Belarus
Belarus
References
1. Spenser D.B., Mehrabian R., Flemings М.С. Pheological behavior of Sn-15 Pet Pb in the ciystalUzation rabge // MetaUurgical Trans. 1972. Vol. 3. P. 1925-1932.
2. Flemings M.C. Behaviour of metal alloys in the semisolid state // Metali. Trans. B. 1991. Vol. 22. P. 269-293.
3. Young K.P. Semi-solid metal forming alloyes and composites // Proc. Symposium on Nature and Properties of Semi-Solid Materials, J.A.Sekhar and J.A.Dantzing (eds.). TMS, Warrendale, PA. 1992. P. 245-266.
4. Kirkwood D.H. Semisolid metal processing// Int. Mat. Rev. 1994. Vol. 39. P. 173-189.
5. Физическое материаловедение. В 3-х т. / Под ред. Р.У. Кана, П. Хаазена Т. 2. Фазовые превращения в металлах и сплавах и сплавы с особыми свойствами. М.: Металлургия, 1987.
6. Flemings М.С. SSM: some thoughts on past milestones and on the path ahead // Proc. 6-th Int. Conf. “Semi-solid processing of alloys and composites”. Turin, Italy, Sept. 27—29, 2000. P. 11-13.
7. Fan Z., Ji S., Be vis M.J. Twin-screw rheomoulding - a new semi-solid processing technology // Proc. 6-th Int. Conf. “Semi-solid processing of alloys and composites”. Turin, Italy, Sept. 27— 29, 2000. P. 61-66.
8. Walukas D., LeBeau S., Prewitt N., Decker R. Thixomoulding — technology opportunities and practical uses // Proc. 6-th Int. Conf. “Semi-solid processing of alloys and composites”. Turin, Italy, Sept. 27—29, 2000. P. 109-114.
9. Atkinson H.V., Karpanos P., Kirkwood D.H. Alloy development for thixoforming // Proc. 6-th Int. Conf. “Semisolid processing of alloys and composites”. Turin, Italy, Sept. 27— 29, 2000. P. 443-450.
10. Гельперин Н.И., Носов Г.А. Основы техники кристаллизации расплавов. М.: Химия. 1975. И. Kirkwood D.H., Sellars С.М., Eliasboyed L.G. Thixotropic materials. US Patent 5037489, 1991.
11. Фролов Ю.Г. Курс коллоидной химии (Поверхностные явления и дисперсные системы). М.: Химия. 1982.
12. Modigell М., Коке J. Time-dependent rheological properties of semi-solid metal alloyes // Mechanics of Time-Dependent Materials. 1999. Vol. 3. P. 15-30 (Kluweг Acad. Publishers, Netherlands).
13. Fan Z., Ji S., Be vis M.J. Twin-screw rheomoulding — a new semi-solid processing technology. Proc. 6-th Int. Conf. “Semisolid processing of alloys and composites”. Turin, Italy, Sept. 27-29, 2000. P. 61-66.
14. Peng H., HsuW.-M. Development on rheomoulding of magnesium parts. 6-th Int. Conf. “Semi-solid processing of alloys and composites”. Turin, Italy, Sept. 27—29, 2000. P. 313—317.
15. Xie S., Ding Z., Guo J., Huang S., Yang X. Deformation behevior of Al-6.6%Si alloy in the semi-solid state. 6-th Int. Conf. “Semi-solid processing of alloys and composites”. Turin, Italy, Sept. 27-29, 2000. P. 765-770.
16. Nohn B., Morjan U., Hartmann D. Thixoforming of steel. 6-th Int. Conf. “Semi-solid processing of alloys and composites”. Turin, Italy, Sept. 27—29, 2000. P. 265—272.
17. Chayong S., Karpanos P., Atkinson H.V. Semisolid processing of aluminum 7075. 6-th Int. Conf. “Semisolid processing of alloys and composites”. Turin, Italy, Sept. 27-29, 2000. P. 649-654.
18. Nui X.P., Hu B.H., Pinwill I. Semi-solid processing on a near-liquidus cast Al-5%Ng base alloy for anodizing applications 6-th Int. Conf. “Semi-solid processing of alloys and composites”. Turin, Italy, Sept. 27-29, 2000. P. 759-764.
19. Bourell D.L., Marcus H.L., Barlow J.-W., Beaman J.. Selective laser sintering of metal and ceramics // Int. J. Powder Met. 1992. Vol. 28, N.4. P.369-381.
20. Agarwala M., Bourell D., Beaman J., Marcus H., Bari ow J. Direct selective laser sintering of metals // Rapid Prototyping J. 1995. Vol.l, N1. P.26-36.
21. Yo о n S.W., Lee H.M. A thermodynamic study of phase equilibria in the Sn-Bi-Pb solder system // Calphad. 1998. Vol. 22, N.2. P.167-178.
Review
For citations:
Tolochko N.K., Shienok J.A., Mjaldun A.Z., Mozzharov S.E. Reo- and thixocompacting - new approaches to casting of materials in hard-fluid state. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2003;(2):39-46. (In Russ.)
Views:
232
Email this article 