Reverse grooving for cross-screw reduction of tube bullets
https://doi.org/10.21122/1683-6065-2018-3-82-87
Abstract
The technology of cross-screw reduction of tube billets with reverse correction is presented. The calculation of the change in the geometry of the workpiece with a change in the feed angle is carried out. It is shown that for small feeding angles the change in geometry is insignificant, which makes it possible to conduct reverse correction of the workpiece. The calculation of parameters of reverse grooving is carried out.
About the Authors
V. A. Tamila
Belarusian National Technical University
Belarus
Minsk, 65, Nezavisimosti ave.
Belarus
Minsk, 65, Nezavisimosti ave.
V. V. Liaukovich
Physical-Engineering Institute of the NAS of Belarus
Belarus
Minsk, 10, Kuprevich str.
Belarus
Minsk, 10, Kuprevich str.
References
1. . Klubovich V. V., Tamila V. A. Tekhnologii izgotovleniya i obrabotki special’nyh periodicheskih profilej [Technologies for manufacturing and processing of special periodic profiles]. Minsk, BNTU Publ., 2007, 298 p.
2. . Karamyshev A. P., Nekrasov I. I., Parshin V. S., Systerov V. A. Opredelenie usilija obzhatija zagotovok na radial’no-kovochnoj mashine AVS [Determination of the compression force of workpieces on a radial forging machine AVS]. Metallurg = Metallurgist, 2009, no. 3, pp. 61–64.
3. Allwood J. M., Utsunomiya H. A survey of flexible forming processes in Japan, International Journal of Machine Tools & Manufacture, 2006, no. 46, pp. 1939–1960. doi: 10.1016/j.ijmachtools.2006.01.034.
4. . Chumadin A. S., Shishkin A. A. Issledovanie processa obzhima tonkostennyh trub [Study of the process of reduction thinwalled tubes]. Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem = Forging and stamping production. Metal forming, 2012, no. 11, pp. 14–18.
5. . Barabashkin V. P., Tartakovskij I. K. Proizvodstvo trub na agregatah s trehvalkovym raskatnym stanom [Production of tubes on a three-roll rolling mill], Moscow, Metallurgija Publ., 1981, 148 p.
Review
For citations:
Tamila V.A., Liaukovich V.V. Reverse grooving for cross-screw reduction of tube bullets. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2018;(3):82-87. (In Russ.) https://doi.org/10.21122/1683-6065-2018-3-82-87
Views:
452
Email this article 