Forming of the properties of an alloy on a Co-Cr-basis using casting-deformation technology
https://doi.org/10.21122/1683-6065-2018-4-119-126
Abstract
The article describes the method of obtaining a special medical alloy based on Co-Cr, which is also used to create implants for large joints of a man (hip and knee). The analysis of the optimal relationship between the alloy components is carried out. Also in this article the results of investigations of technological plasticity, microstructure, phase composition of samples from alloy are presented. Co-Cr analysis, subjected to longitudinal draft and extrusion.
About the Authors
A. T. VolochkoBelarus
Minsk, Belarus, 10, Kuprevich str.
A. Yu. Izobello
Belarus
Minsk, Belarus, 10, Kuprevich str.
E. G. Bilenko
Belarus
Minsk, Belarus, 10, Kuprevich str.
I. I. Smozhevskiy
Belarus
Minsk, Belarus, 10, Kuprevich str.
S. V. Gusarov
Belarus
Minsk, Belarus, 10, Kuprevich str.
References
1. Lucyk V. I. Analiz poverhnosti likvidusa trojnyh system [Analysis of the ternary liquidus surface]. Moscow, Nauka Publ., 1987. 150 p.
2. Lisicin V. F. Beznikelevye korrozionnostojkie splavy. Razrabotka i primenenie. Diss. cand. techn. nauk [Non-nickel corrosion resistant alloys. Development and application. The sis for Ph. D.]. Minsk, 2005, 195 p.
3. Docenko V. I., Chajka E. N., Braude I. S. Issledovanie struktury litogo splava Co-Cr-Mo [Study of the structure of the cast alloy Co-Cr-Mo]. Metallografija i novejshie tehnologii Metallography and the latest technology, 2002, Vol. 24, no. 1, pp. 113.
4. Ivashko V. V. Issledovanie struktury i svojstv Co–Cr–Mo-splava v litom i gorjachedeformirovannom sostojanii [Study of the structure and properties of the Co–Cr–Mo-alloy in the cast and hot-deformed state]. Izvestija Nacional’noj akademii nauk Belarusi Proceeding of the National Academy of Sciences of Belarus. Physical-Tehnical series, 2012, no. 1, pp. 4.
5. Baranova L. V., Demina Je. L. Metallograficheskoe travlenie metallov i splavov [Metallographic etching of metals and alloys]. Moscow, Metallurgija Publ., 1986, 256 p.
6. Perlin I. L., Rajtbarg L. H. Teorija pressovanija metallov [Metal Theory]. Moscow, Metallurgija Publ, 1975, 336 p.
Review
For citations:
Volochko A.T., Izobello A.Yu., Bilenko E.G., Smozhevskiy I.I., Gusarov S.V. Forming of the properties of an alloy on a Co-Cr-basis using casting-deformation technology. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2018;(4):119-126. (In Russ.) https://doi.org/10.21122/1683-6065-2018-4-119-126