Centrifugal casting – perspective technology of production of details for agricultural machines
https://doi.org/10.21122/1683-6065-2019-2-23-27
Abstract
The basic requirements for cast blanks and details of agricultural machinery are considered. The prospects of using the method of centrifugal casting in the production of workpieces for the repair and maintenance of agricultural machinery in Belarus are shown. On the basis of the analysis of a number of details of the agricultural machines having the sufficient program of production the choice of the equipment for centrifugal casting of JSC BELNIILIT’s design was selected.
About the Authors
A. A. Andrushevich
Belarusian State Agrarian Technical University
Belarus
Minsk, 99/2, Nezavisimosti ave.
Belarus
Minsk, 99/2, Nezavisimosti ave.
A. D. Oсhotsky
Belarusian State Agrarian Technical University
Belarus
Minsk, 99/2, Nezavisimosti ave.
Belarus
Minsk, 99/2, Nezavisimosti ave.
M. A. Sadokha
BELNIILIT
Belarus
Minsk, 28, Mashinosroiteley str.
Belarus
Minsk, 28, Mashinosroiteley str.
References
1. https://www.agroinvestor.ru/tech/article/28901-dragotsennye-zapchasti/.
2. Volkov D. A., Melnikov A. P., Volkov A. D., Mitskevich A. V., Trubitskiy R. E. Novye razrabotki OAO «BELNIILIT» v oblasti tsentrobezhnogo litya [New developments of «BELNIILIT» in the field of centrifugal casting]. Lit’e i metallurgiya = Foundry production and metallurgy, 2011, no. 4, pp. 31–35.
3. Radchenko A. A., Rudenko A. A., Boroznjak Yu. P. Sovershenstvovaniye tekhnologicheskogo protsessa izgotovleniya sta’nykh otlivok nomenklatury selkhozmashinostroyeniya.[Perfecting of the technological process of steel castings production of machine-building nomenelature].Lit’e i metallurgiya = Foundry production and metallurgy, 2003, no. 2, pp. 55–56.
4. Zanko D. V., Levchuk S. V., Saharevich A. N. Osobennosti oborudovaniya dlya tsentrobezhnogo litya i tekhnologiya polucheniya otlivok [Features of equipment for centrifugal casting and technology of obtaining blanks]. Lit’e i metallurgiya = Foundry production and metallurgy, 2012, no. 3, pp. 251–254.
5. Volkov D. A., Volkov A. D. Tekhnologii izgotovleniya korotkomernykh zagotovok metodom tsentrobezhnogo litya. [Manufacturing technology of short-length tube billets by centrifugal casting]. Lit’e i metallurgiya = Foundry production and metallurgy, 2013, no. 3, pp. 128–137.
6. Stepanov Ju. A., Balandin G. F., Rybkin V. A. Tekhnologiya liteynogo proizvodstva: Spetsialnyye sposoby litya [Foundry technology: Special casting methods. Textbook for universities]. Moscow, Mashinostroyeniye Publ., 1983. 287 p.
7. Stetsenko V. Ju., Baranov K. N., Novikov V. V. Vliyaniye gravitatsionnogo koeffitsiyenta na strukturu tsentrobezhnykh otlivok iz silumina AK18. [The influence of gravity coefficient on the structure of centrifugal castings silumina AK18]. Lit’e i metallurgiya = Foundry production and metallurgy, 2013, no. 3, pp. 125–127.
8. Tolochko N. K. Sovremennyye liteynye tekhnologii [Modern foundry technology]. Minsk, BGATU Publ., 2009. 359 p.
9. Proyektirovaniye tekhnologiy mekhanicheskoy obrabotki i sborki pri remonte selskokhozyaystvennoy tekhniki [Designing technologies for machining and assembly when re-mounting agricultural machinery]. Minsk, BGATU Publ., 2013. 460 p.
Review
For citations:
Andrushevich A.A., Oсhotsky A.D., Sadokha M.A. Centrifugal casting – perspective technology of production of details for agricultural machines. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2019;(2):23-27. (In Russ.) https://doi.org/10.21122/1683-6065-2019-2-23-27
Views:
563
Email this article 