Modern metallography – the basis of foundry material science
https://doi.org/10.21122/1683-6065-2019-2-99-108
Abstract
The article briefly discusses the capebilities of modern metallography – optical contrasting, quantitative metallography, image processing programs. The question of the absence of modern literature on metallography is touched on. The problem of representing the structures of materials and the Internet is discussed. The problems of the development of metallographic research in Belarus are also presented. It is noted that the development of metallographic research in Belarus is hampered by the lack of funds for the acquisition of the equipment, as well as the lack of qualified personnel.
About the Author
A. G. Anisovich
Physical-Engineering Institute of NAS of Belarus
Belarus
Minsk, Belarus, 10, Kuprevich str.
Belarus
Minsk, Belarus, 10, Kuprevich str.
References
1. Anisovich A. G., Rumjanceva I. N. Praktika metallograficheskogo issledovanija materialov [Practice metallographic research materials]. Minsk, Belaruskaja navuka Publ., 2013, 221 p.
2. Anisovich A. G. Iskusstvo metallografii: ispol’zovanie metodov opticheskogo kontrastirovanija [The Art of Metallography: Using Optical Contrasting Techniques]. Vesci NAN Belarusi Proceedings of the National Academy of Sciences of Belarus. Physical-Technical series, 2016, no. 1, pp. 36–42.
3. Anisovich A. G. Primenenie poljarizovannogo sveta v analize metallov i splavov [The use of polarized light in the analysis of metals and alloys]. Lit’e i metallurgija Foundry production and metallurgy, 2012, no. 3, pp. 146–151.
4. Anisovich A. G., Rumjanceva I. N. Vizualizacija poverhnosti metodom differencial’no-interferencionnogo kontrasta [Surface Visualization by Differential Interference Contrast]. Lit’e i metallurgija Foundry production and metallurgy, 2013, no. 3, pp. 156–162.
5. Klark Je. R., Jeberhardt K. N. Mikroskopicheskie metody issledovanija materialov [Microscopic methods for the study of materials]. Moscow, Tehnosfera Publ., 2007, 376 p.
6. Egorova O. V. Tehnicheskaja mikroskopija. S mikroskopom na «ty» [Technical microscopy. With a microscope on «you»]. Moscow, Tehnosfera Publ., 2007, 376 p.
7. Guljaev A. P. Metallovedenie [Metal science]. Moscow, Metallurgija Publ., 1977, 647 p.
8. www. structure.by.
9. Anisovich A. G., Urban T. P., Bujnickaja A. S. Opredelenie plotnosti kuprita [Determination of cuprite density]. Trudy 23-j mezhdunarodnoj nauchno-tehnicheskoj konferencii «Litejnoe proizvodstvo i metallurgija 2015. Belarus’», Minsk, 21–22 oktjabrja 2015 = Proceedings of the 23rd International Scientific and Technical Conference «Foundry Production and Metallurgy 2015. Belarus», Minsk, October 21–22, 2015. P. 66–70.
10. Anisovich A. G., Andrushevich A. A. Mikrostruktury chernyh i cvetnyh metallov [Microstructures of ferrous and non-ferrous metals]. Minsk, Belaruskaja navuka Publ., 2015, 131 p.
11. Anisovich A. G, Rumjanceva I. N. Antiprodukcija: problema kachestva metalla [Anti-production: quality metal problem]. Lit’e i metallurgija Foundry production and metallurgy, 2009, no. 3, pp. 127–131.
12. Blanter M. E. Metodika issledovanija metallov i obrabotki opytnyh dannyh [Methods of research metals and processing of experimental data]. Moscow, Metallurgizdat Publ., 1952, 444 p.
13. Saltykov S. A. Stereometricheskaja metallografija [Stereometric metallography]. Moscow, Metallurgija Publ., 1976, 272 p.
14. Anisovich A. G., Rumjanceva I. N., Bisljuk L. V. Opredelenie balla zerna stali komp’juternymi metodami [Determination of grain points have become computerized]. Lit’e i metallurgija Foundry production and metallurgy, 2010, no. 3, pp. 100–104.
15. Andrushevich A. A. Materialovedenie. Tehnologija konstrukcionnyh materialov. Materialovedenie: praktikum [Science of Materials. Technology of construction materials. Science of Materials: Workshop]. Minsk, BGATU Publ., 2013, 176 p.
16. Anisovich A. G. Problemy metallograficheskogo opredelenija kolichestva kisloroda v deformirovannoj medi [Problems of metallographic determination of the amount of oxygen in deformed copper]. Lit’e i metallurgija Foundry production and metallurgy, 2014, no. 1, pp. 74–78.
17. Anisovich A. G., Rumjanceva I. N., Misuno P. N. Opredelenie soderzhanija kisloroda v medi metodom komp’juternogo analiza izobrazhenij [Determination of oxygen content in copper by computer image analysis]. Lit’e i metallurgija Foundry production and metallurgy, 2010, no. 1–2, pp. 306–310.
Review
For citations:
Anisovich A.G. Modern metallography – the basis of foundry material science. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2019;(2):99-108. (In Russ.) https://doi.org/10.21122/1683-6065-2019-2-99-108
Views:
676
Email this article 