The perspective of application of carburized steels, manufactured according to European standard, for gears of domestic mobile machines
https://doi.org/10.21122/1683-6065-2019-3-147-152
Abstract
Based on the data on the chemical composition of cemented steels produced according to the European standard EN 10084, the calculation of their hardenability by different methods was carried out. The use of methods is justified by comparing the results of the race with the experiment. The assessment of applicability of the analyzed steels for gears of transmissions of domestic mobile machines is carried out. The classification of cemented economically alloyed steels with chemical composition according to EN 10084 norms according to the criterion of hardenability is developed, according to which these steels can be divided into 4 groups according to the applicability for transmission gears of domestic automotive technology: for gears with a module of up to 4 mm, up to 5 mm, up to 8 mm and up to 10 mm.
About the Authors
S. P. Rudenko
Joint Institute of Mechanical Engineering of NAS of Belarus
Belarus
Minsk, 12, Akademicheskaya str.
Belarus
Minsk, 12, Akademicheskaya str.
A. L. Valko
Joint Institute of Mechanical Engineering of NAS of Belarus
Belarus
Minsk, 12, Akademicheskaya str.
Belarus
Minsk, 12, Akademicheskaya str.
S. G. Sandomirsky
Joint Institute of Mechanical Engineering of NAS of Belarus
Belarus
Minsk, 12, Akademicheskaya str.
Belarus
Minsk, 12, Akademicheskaya str.
References
1. Men’shikova T. Ja. Povar V. I. Vysokoprochnaja cementuemaja stal’ dlja tjazhelonagruzhennyh detalej mashin [High-strength a case-hardening steel for high-energy machine components]. Metallovedenie i termicheskaja obrabotka metallov Physical metallurgy and heat treatment of metals, 1988, no. 6, pp. 17–19.
2. Tel’dekov V. A., Merilova E. A., Shevchuk V. P. Kompleksnolegirovannaja stal’ dlja tjazhelonagruzhennyh cementuemyh zubchatyh koles [Complex alloyed steel for high-tensional case-hardening tooth gears]. Metallovedenie i termicheskaja obrabotka metallov Physical metallurgy and heat treatment of metals, 1987, no. 5, pp. 21–26.
3. Shishko A. S., Moiseenko E. A., Sidorenko A. G. Povyshenie resursa krupnogabaritnyh zubchatyh koles s ispol’zovaniem novyh stalej [Raise of a resource of large-sized tooth gears with use of new steels]. Trudy OIM NAN Belarusi «Aktualnye voprosy mashinovedenija» Proc. of the Joint Institute of Mechanical Engeneering of the NAS of Belarus «Topical Issues of Mechanical Engeneering», 2017, no. 6, pp. 219–225.
4. Rudenko S. P., Val’ko A. L., Dudeckaja L. R., Emeljanovich I. V. Novaja cementuemaja stal’ s reglamentiruemoj prokalivaemost’ju dlja zubchatyh koles transmissij [New carburized steel with regulated hardenability for gears of transmissions]. Mehanika mashin, mehanizmov i materialov Mechanics of mashines, mechanisms and materials, 2013, no. 3, pp. 57–61.
5. Rudenko S. P. Val’ko A. L. Osobennosti primenenija jekonomnolegirovannyh stalej dlja krupnomodul’nyh zubchatyh koles [Feature of application of the economical steel alloy for largely modular gear wheels]. Stal’ Steel, 2018, no. 8, pp. 54–58.
6. Gol’dshtejn Ja. E. Nizkolegirovannye stali v mashinostroenii [Low alloy steels in mechanical engineering]. Moscow–Sverdlovsk, Mashgiz Publ., 1963, 240 p.
7. Dokudovskij Ju. N., Gribovskij P. K., Politov V. A. Osvoenie konstrukcionnyh marok stalej dlja avtomobil’noj promyshlennosti na OAO «BMZ» [Development of constructional staals grades for automative industry at OJSC «BSW»]. Lit’e i metallurgija Foundry production and metallurgy, 2012, no. 2, pp. 75–77.
8. Gudremon Je. Special’nye stali [Special steels]. Moscow, Metallurgy Publ., 1966, part 1, 736 p.
9. Sil’man G. I., Serpik L. G., Fedosjuk A. A. Racional’noe upravlenie strukturoj i svojstvami margancevyh stalej tipa 20GL s ispol’zovaniem pokazatelja prokalivaemosti. Ch. 1. O vozmozhnosti i celesoobraznosti ispol’zovanija pokazatelja prokalivaemosti dlja normalizuemyh margancevyh stalej tipa 20GL [Rational management of the structure and properties of manganese steel type 20GL using the index of hardenability. Part 1. About possibility and expediency of use of index of calcination for normalized manganese steels of type 20GL]. Metallovedenie i termicheskaja obrabotka metallov Physical metallurgy and heat treatment of metals, 2011, no 2, pp. 3–8.
10. Grossmann M. Elemants of Hardenability, 98, ASM, Cleveland, 1952.
11. Rudenko S. P., Val’ko A. L., Shipko A. A. Komp’juternaja programma «Raschet prokalivaemosti konstrukcionnyh stalej (H-Steel)»: [The computer (H-Steel)]. Sv–vo RB, no 846.
12. Rudenko S. P., Shipko A. A., Val’ko A. L., Vengura A. V., Baradynceva E. P., Radionov A. V., Zahorevich S. V. Universal’naja programma rascheta prokalivaemosti konstruk-cionnyh stalej [Universal program of account of a hardness penetration of a structural steel]. Litejnoe proizvodstvo i metallurgija 2015 Foundry production and metallurgy 2015, Belarus, Zhlobin, 21–22 october 2015, pp. 116–122.
13. Rudenko S. P., Val’ko A. L. Razrabotka rezhimov himiko-termicheskoj obrabotki zubchatyh koles iz jekonomno legirovannoj stali [Working of regimes of chemical heat treatment of tooth gears from economical the steel alloy]. Mehanika mashin, mehanizmov i materialov Mechanics of mashines, mechanisms and materials, 2017, no. 2, pp. 34–38.
Review
For citations:
Rudenko S.P., Valko A.L., Sandomirsky S.G. The perspective of application of carburized steels, manufactured according to European standard, for gears of domestic mobile machines. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2019;(3):147-152. (In Russ.) https://doi.org/10.21122/1683-6065-2019-3-147-152
Views:
2067
Email this article 