Application of rotary furnaces for melting ferrous alloys
https://doi.org/10.21122/1683-6065-2020-1-9-13
Abstract
The article presents the experience of using rotary tilting furnaces (RTF) for melting ferrous alloys, as well as for recycling of dispersed iron-containing wastes (chips, dross, sludge) to obtain high – quality casting alloys directly in the RTF or when implementing the duplex process: RTF-induction furnace or RTF-arc furnace. The main technical characteristics of RTF that developed by Belarusian scientists and designers are described. The most promising areas of application of RTF were shown. An approximate calculation of the economic effect associated with the use of RTF in the production of steel and cast iron castings is performed.
About the Authors
S. L. Rovin
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosty ave.
Belarus
Minsk, Belarus, 65, Nezavisimosty ave.
L. E. Rovin
Gomel State Technical University named after P. O. Sukhoj
Belarus
Gomel, Belarus, 48, Octyabrya avе.
Belarus
Gomel, Belarus, 48, Octyabrya avе.
I. S. Nasevich
Technolit Co
Belarus
Minsk, Belarus, 24, Kolasa str.
Belarus
Minsk, Belarus, 24, Kolasa str.
References
1. Lisienko V. G., Shhelokov Ja. M., Ladygichev M. G. Vrashhajushhiesja pechi: teplotehnika, upravlenie i jekologija [Rotary kilns: heating technology, management and ecology]. Moscow, Teplotehnik Publ., 2004, 592 p.
2. Novichkov S. B. Teorija i praktika pererabotki othodov aljuminija v rotornyh naklonnyh pechah. Diss. dokt. tehn. nauk [Theory and practice of processing aluminum waste in rotary inclined furnaces. Dr. tech. sci. diss.]. Irkutsk, 2008, 348 p.
3. Shmits K. Tehnologii plavlenija materialov s bol’shoj udel’noj poverhnost’ju [Technology of melting materials with a large specific surface]. Cvetnye metally Non-ferrous metals, 2006, no. 9, pp. 109–113.
4. Sogemi Engineering S. r. l. Rotary Oxy-Combustion Melting Furnaces for Cast Iron // Web Site Mode of access: http://www.sogemieng.it.2013.
5. Rovin S. L. Recikling metalloothodov v rotacionnyh pechah [Waste recycling in rotary kilns]. Minsk, BNTU Publ., 2015, 382 p.
6. Rovin S. L. Sposob malotonnazhnogo reciklinga dispersnyh zhelezosoderzhashhih othodov bez ih predvaritel’noj podgotovki putem tverdo-zhidkofaznogo vosstanovlenija v rotacionnoj naklonjajushhejsja pechi s polucheniem chuguna ili stali [The method of small-tonnage recycling of dispersed iron-containing wastes without their preliminary preparation by solid-liquid phase reduction in a rotary tilting furnace to produce cast iron or steel]. Evrazijski patent, no. 033560, 2019.
7. Rovin S. L., Rovin L. E., Kalinichenko A. S., Dolgij L. P., Shejnert V. A. Sozdanie sobstvennoj syr’evoj bazy dlja litejnogo proizvodstva mashinostroitel’nyh predprijatij [Creation of own raw-material base for foundry production on machine-building enterprises]. Lit’e i metallurgija = Foundry production and metallurgy, 2018, no. 2, pp. 29–36.
Review
For citations:
Rovin S.L., Rovin L.E., Nasevich I.S. Application of rotary furnaces for melting ferrous alloys. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2020;(1):9-13. (In Russ.) https://doi.org/10.21122/1683-6065-2020-1-9-13
Views:
1548
Email this article 