Development of a method for effective strengthening rolled rebar with diameter of 8 mm of ordinary quality steel in terms of mill 320 SPC-1 at OJSC «BSW – Management Company of the Holding «BMC»
https://doi.org/10.21122/1683-6065-2020-1-21-24
Abstract
The global competition, unstable situation in the world market of rolled metal products, as well as increasing with each day the requirements of consumers of products pose complex tasks for the manufacturer, which must be solved in the shortest possible time. One of these tasks is to expand the range of rebar rolled products in the conditions of the variety rolling shop no. 1 on the continuous small-grade rolling mill 320. Until recently, rolling of reinforcing profiles with a diameter from 10 mm to 40 mm was carried out at the 320 rolling mill. In order to expand the range of rebar products, work was carried out to develop a production technology for profile no. 8 rod fittings with thermal hardening in the mill line for class 500.
About the Authors
O. M. Kirilenko
BSW – Management Company of the Holding «BMC»
Belarus
Zhlobin, Gomel region, Belarus, 37, Promyshlennaya str.
Belarus
Zhlobin, Gomel region, Belarus, 37, Promyshlennaya str.
P. A. Babkov
BSW – Management Company of the Holding «BMC»
Belarus
Zhlobin, Gomel region, Belarus, 37, Promyshlennaya str.
Belarus
Zhlobin, Gomel region, Belarus, 37, Promyshlennaya str.
M. V. Petrenko
BSW – Management Company of the Holding «BMC»
Belarus
Zhlobin, Gomel region, Belarus, 37, Promyshlennaya str.
Belarus
Zhlobin, Gomel region, Belarus, 37, Promyshlennaya str.
A. V. Rusalenko
BSW – Management Company of the Holding «BMC»
Belarus
Zhlobin, Gomel region, Belarus, 37, Promyshlennaya str.
Belarus
Zhlobin, Gomel region, Belarus, 37, Promyshlennaya str.
References
1. Zhuchkov S. M., Matochkin V. A., Andrianov D. N., Kirilenko O. M. Issledovanie parametrov processa prokatki-razdelenija pri proizvodstve armaturnyh profilej na stane 320 RUP «BMZ» [Study of the parameters of the rolling-separation process in the production of reinforcing profiles at the mill 320 RUE «BMZ»]. Lit’е i metallurgija Foundry production and metallurgy, 2006, no. 2 (38), pp. 56–62.
2. Kugushin A. A., Uzlov I. G., Kalmykov V. V., Madatjan S. A., Ivchenko A. V. Vysokoprochnaja armaturnaja stal’ [High Strength Reinforcing Steel]. Moscow, Metallurgija Publ., 1986, 272 p.
3. Zhuchkov S. M., Matochkin V. A., Andrianov D. N., Murikov M. A. Sovershenstvovanie konstrukcij ohlazhdajushhih ustrojstv linii ohlazhdenija sterzhnevogo armaturnogo prokata RUP «BMZ» [Improving the design of cooling devices for the cooling line of bar reinforcing steel of RUE «BMZ»]. Lit’e i metallurgija Foundry production and metallurgy, 2006, no. 2 (38), pp. 67–70.
4. Levchenko L. N., Natapov A. S., Mashkin L. F., Hudik Ju. T., Baskin S. L. Proizvodstvo armaturnoj stali [Reinforcing steel production]. Moscow, Metallurgija Publ., 1984, 136 p.
Review
For citations:
Kirilenko O.M., Babkov P.A., Petrenko M.V., Rusalenko A.V. Development of a method for effective strengthening rolled rebar with diameter of 8 mm of ordinary quality steel in terms of mill 320 SPC-1 at OJSC «BSW – Management Company of the Holding «BMC». Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2020;(1):21-24. (In Russ.) https://doi.org/10.21122/1683-6065-2020-1-21-24
Views:
490
Email this article 