Analysis of modern composite materials used in the manufacture of model kits for small-scale foundry production, obtained using bonding technology
https://doi.org/10.21122/1683-6065-2020-3-15-22
Abstract
The article presents modern data on the materials used to create model kits, the method of their installation for use on any foundries, specializing in the repair and creation of castings by experimental or small-scale batches. The analysis of the used materials, adhesive compositions for their fastening, as well as economic indicators of the costs necessary for their production was made. The properties of glued joints used for manufacturing components of model kits from plastics and its combinations with metal parts are shown.
About the Authors
M. L. Kalinichenko
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti Ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti Ave.
L. P. Dolgiy
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti Ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti Ave.
U. A. Kalinichenko
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti Ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti Ave.
References
1. Zatulovskij S. S., Kezik V. Ja., Ivanova R. K. Litye kompozicionnye materialy [Cast Composite Materials]. Kiev, Tehnika Publ., 1990, 240 p.
2. Ospennikova O. G., Aslanjan I. R. Napravlenija razvitija izgotovlenija model’nyh kompozicij dlja lopatok i drugih detalej GTD [Directions of development of the manufacture of model compositions for blades and other parts of gas turbine engines]. Litejnoe proizvodstvo = Foundry, 2018, no. 3, pp. 20–24.
3. Abramov G. G. Spravochnik molodogo litejshhika [Handbook of a young caster]. Moscow, Vysshaja shkola Publ., 1983, 207 p.
4. Rogov V.A., Poznjak G. G. Tehnologija mashinostroenija. Shtampovoe i litejnoe proizvodstvo [Engineering Technology. Stamping and foundry]. Moscow, Izdatel’stvo Jurajt Publ., 2019, 330 p.
5. Grablev A. N., Boldin A. N. Mashiny i tehnologija litejnogo proizvodstva [Foundry machines and technology]. Moscow, MGIU Publ., 2010, 228 p.
6. Nikiforov V. M. Tehnologija metallov i drugih konstrukcionnyh materialov: uchebnik dlja tehnikumov [Technology of metals and other structural materials]. S.‑Peterburg, Politehnika Publ., 2015, 382 p.
7. Val’ter A.M., Protopopov A.A. Osnovy litejnogo proizvodstva [Foundry Basics]. Moscow, Vologda: Infa‑Inzhenerija Publ., 2019, 332 p.
8. Konspekt lekcij po kursu «Model’noe proizvodstvo» [Lecture notes on the course «Model Production»]. Mariupol’, PGTU Publ., 2009, 138 p.
9. Klebaner V. Ja. Jekonomika i organizacija model’nogo proizvodstva [Economics and organization of model production]. Leningrad, Mashinostroenie Publ., 1968, 160 p.
10. Dmitrovich A. M. Spravochnik litejshhika [Foundry Handbook]. Minsk, Vyshjejshaja shkola Publ., 1989, 391 p.
11. Alekseev S.A. Spravochnik litejshhika [Foundry Handbook]. Moscow, MAShGIZ Publ., 1962, 524 p.
12. Neljub I.A., Kushel’ P.A., Rovin S. L. Osobennosti i preimushhestva primenenija sovremennyh plastopolimernyh materialov dlja izgotovlenija model’noj osnastki [Features and advantages of using modern plastopolymer materials for the manufacture of model equipment]. Lit’e i metallurgija = Foundry production and metallurgy, 2010, no.4, vol. 58, pp. 36–39.
13. Janovich A., Kravec A. Polimernye materialy RAMPF Tooling dlja izgotovlenija litejnoj osnastki [Polymeric materials RAMPF Tooling for the manufacture of foundry equipment]. Litejnoe proizvodstvo = Foundry, 2013, no. 8, pp. 9–10.
14. Janovich A., Kostjaev P. Model’nyj plastik RAKU‑TOOL dlja izgotovlenija litejno‑sterzhnevoj osnastki [Model plastic RAKU‑TOOL for the manufacture of foundry‑core equipment]. Litejnoe proizvodstvo = Foundry, 2013, no. 11, pp. 34–36.
15. Janovich A., Kostjaev P. Ob’emnye bloki proizvodstva RAMPF Tooling dlja izgotovlenija litejnoj osnastki [RAMPF Tooling Volumetric Blocks for Casting Tooling]. Litejnoe proizvodstvo = Foundry, 2013, no. 12, pp. 26–28.
16. Majorov A. Plastik – perspektivnyj material dlja model’noj osnastki [Plastic – a promising material for model equipment]. Litejshhik Rossii = Foundry of Russia, 2018, no. 9, pp. 12–18.
17. Kalinichenko M. L., Dolgij L. P., Rovin S. L., Kukareko V.A., Kalinichenko V.A. Sovremennye sposoby sozdanija model’nyh komplektov dlja lit’ja [Modern methods of creating model kits for casting]. Lit’e i metallurgija = Foundry production and metallurgy, 2018, no. 3, vol. 91, pp. 125–130.
18. Kalinichenko M. L., Kalinichenko V.A. Novye metody kreplenija poristyh i kompaktnyh materialov [New methods for fixing porous and compact materials]. Sbornik nauchnyh trudov «Tehnologii i oborudovanie mehanicheskoj i fiziko-tehnicheskoj obrabotki» [Collection of scientific papers «Technologies and equipment for mechanical and physical‑technical processing»]. Minsk, FTI NAN Belarusi Publ., 2015, pp. 72–79.
19. Vasilev V. V. , Tarnopol'skij Ju. M. Kompozicionnye materialy [Composite materials]. Moscow, Mashinostroenie Publ., 1990, 570 p.
Review
For citations:
Kalinichenko M.L., Dolgiy L.P., Kalinichenko U.A. Analysis of modern composite materials used in the manufacture of model kits for small-scale foundry production, obtained using bonding technology. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2020;(3):15-22. (In Russ.) https://doi.org/10.21122/1683-6065-2020-3-15-22
Views:
1427
Email this article 