Production of metal cord construction size 7 x 7 x 0,22 on root machines type RIR –15
https://doi.org/10.21122/1683-6065-2020-3-59-61
Abstract
Since the appearance of the reinforcing material for automobile tires and rubber products, such as metal cord, you can observe its constant development. Tougher competition among the tire manufacturers makes it a priority to develop new and unique types of these products with improved technical characteristics. The article describes the development trend in the production of metal cord for large and super – large tires in Belarus since 2007 and up to the present.
The purpose of this project is to ensure the delivery of large – diameter metal cord to Belshina OJSC in the required volume. The solution to the problem of fulfilling the volume of deliveries of metal cord with a limited number of equipment while maintaining the quality of products is considered. In the process of work, an alternative scheme for manufacturing metal cord was developed, the selection of technological parameters for tuning and twisting was carried out, and the rope equipment was modernized.
About the Authors
O. M. Matveev
BSW – Management Company of the Holding «BMC»
Belarus
Belarus
Zhlobin City, Belarus, Gomel region, 37, Promyshlennaya Str.
V. V. Shapovalov
BSW – Management Company of the Holding «BMC»
Belarus
Belarus
Zhlobin City, Belarus, Gomel region, 37, Promyshlennaya Str.
I. V. Muzychenko
BSW – Management Company of the Holding «BMC»
Belarus
Belarus
Zhlobin City, Belarus, Gomel region, 37, Promyshlennaya Str.
O. A. Starkina
BSW – Management Company of the Holding «BMC»
Belarus
Zhlobin City, Belarus, Gomel region, 37, Promyshlennaya Str.
Belarus
Zhlobin City, Belarus, Gomel region, 37, Promyshlennaya Str.
References
1. Rumjancev S. V. Kompanija Mishlen – odin iz krupnejshih mirovyh proizvoditelej shin [Michelin is one of the world’s largest tire manufacturers]. Ugol’= Coal, 2019, р. 56.
2. www.gknt.gov.by.
3. Hudolej Ju. L., Rjabcev O.A., Panazovich V. S. Osvoenie proizvodstva metallokorda dlja krupnoi sverhkrupnogabaritnyh shin na RUP «BMZ» [Mastering the production of steel cord for large and oversized tires at RUE «BMZ»]. Lit’e i metallurgija = Foundry production and metallurgy, 2009, no. 2, pp. 164–166.
4. Birjukov B.A., Feoktistov Ju.V., Ignat’ev S. N. Raschety parametrov svivki metallokorda [Calculations of steel cord lay parameters]. Minsk, Belorgstankopromizdat Publ., 1996, 128 p.
5. Hudolej Ju. L. Tehnika i tehnologija izgotovlenija dvuhslojnyh spiral’nyh konstrukcij metallokorda 2+7 i 3+9 s razlichnymi shagami svivki po slojam v odnu tehnologicheskuju operaciju [Technique and technology for the manufacture of two‑layer spiral structures of steel cord 2 + 7 and 3 + 9 with different lay steps in layers in one technological operation]. Lit’e i metallurgija = Foundry production and metallurgy, 2004, no. 3, pp. 172–175.
Review
For citations:
Matveev O.M., Shapovalov V.V., Muzychenko I.V., Starkina O.A. Production of metal cord construction size 7 x 7 x 0,22 on root machines type RIR –15. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2020;(3):59-61. (In Russ.) https://doi.org/10.21122/1683-6065-2020-3-59-61
Views:
402
Email this article 