Technologies of refining of aluminum alloys by gas blowing
https://doi.org/10.21122/1683-6065-2021-1-38-42
Abstract
The results of the analysis of various methods of refining aluminum alloys from dissolved gases and non-metallic inclusions are presented. The influence of a number of technological features of each method on the quality of the melt has been studied. Examples of equipment for the implementation of processes are presented. To analyze the effectiveness of the use of various technologies for refining aluminum alloys, their ranking was carried out. The results of the analysis are in correlation with the trends in the spread of various processes for the refining of aluminum alloys in foundries. It is shown that blowing the melt with inert gases through a rotating impeller is the most effective in terms of a set of indicators in comparison with other methods.
Keywords
About the Authors
M. A. Sadokha
Belarusian National Technical University
Belarus
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
A. A. Andrushevich
Belarusian State Agrarian Technical University
Belarus
Minsk, Belarus, 99, Nezavisimosti
Belarus
Minsk, Belarus, 99, Nezavisimosti
References
1. Gohshtejn M. B., Morozov Ja. I. Rafinirovanie pervichnogo aljuminija ot okisnyh vkljuchenij i gazov [Refining of primary aluminum from oxide inclusions and gases]. Moscow, Metallurgija Publ., 1979, pp. 45–48.
2. Volochko A. T., Sadoha M.A. Aljuminij: tehnologii i oborudovanie dlja poluchenija lityh izdelij [Aluminum: technologies and equipment for producing cast products]. Minsk, Belaruskaja navuka Publ., 2011, 387 p.
3. Andrushevich A.A., Barbarich E. N., Shuljak P. N. Rafinirovanie aljuminievyh splavov produvkoj azotom [Refining of aluminum alloys by blowing with nitrogen]. Tehnologija avtomobilestroenija = Automotive technology, 1983, no. 11, pp. 1–3.
4. Andrushevich A.A. Rafinirujushhaja obrabotka aljuminievyh splavov [Refining treatment of aluminum alloys]. Litejnoe proizvodstvo = Foundry, 1995, no. 3, pp. 12–13.
Review
For citations:
Sadokha M.A., Andrushevich A.A. Technologies of refining of aluminum alloys by gas blowing. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2021;(1):38-42. (In Russ.) https://doi.org/10.21122/1683-6065-2021-1-38-42
Views:
1841
Email this article 