Preview

Neutralization of solvent vapors of brand 646 by the adsorption-catalytic method

https://doi.org/10.21122/1683-6065-2021-1-130-136

Abstract

The aim of the paper is investigation of neutralization of solvent vapors of the brand 646 by an adsorption-catalytic method. The adsorption-catalytic method includes the following stages: adsorption of the solvent components by adsorbent, thermal desorption and periodic flameless catalytic oxidation of organic substances to carbon dioxide and water. Synthetic zeolite of the NaX brand was used as a sorbent, catalyst was porous Al2O3/SiO2 ceramic foam material with an active catalytic phase. Solvent contains aceton, toluene, butylacetate, ethanol, ethyl cellosolve, n-butanol. It is shown that the value of the sorption volume of zeolite for each class of compounds depends on the certain factors: the length and structure of the carbon skeleton, the position of the hydroxyl group (for alcohols and esters), number of methyl groups in the molecules (for benzene derivatives). The conversion of the mixed solvent components was 65.4–90.1 %.

About the Authors

A. S. Panasyugin
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.


N. P. Masherova
Belarusian State Technological University
Belarus
Minsk, Belarus, 13a, Swerdlova str. E


A. R. Tsyganov
Belarusian State Technological University
Belarus
Minsk, Belarus, 13a, Swerdlova str. E


N. D. Pavlovsky
Grodno State Medical University
Belarus

N. Grodno, Belarus, 80, Gorkogo str.



References

1. Panasyugin A. S., Lomonosov V.A., Smorygo O. L. Ispolzovanie adsorbtsionno-kataliticheskogo metoda dlya ochistki ventilyatsionnykh vybrosov formovochnykh uchastkov liteynykh uchastkov ot parov fenola i formaldegida [The use of the adsorption-catalytic method for purification of ventilation emissions of moulding sections of foundries from phenol and formaldehyde vapors]. Lit’e i metallurgiya = Foundry production and metallurgy, 2014, no. 2, pp. 19–25.

2. Panasyugin A. S., Lomonosov V.A., Smorygo O. L. Ispolzovanie adsorbtsionno-kataliticheskogo metoda dlya ochistki ventilyatsionnykh vybrosov, obrazuyuschikhsya pri ispolzovanii azotsoderzhaschikh formovochnykh smesey [The use of the adsorption-catalytic method for purification of ventilation emissions forming under use of nitrogen containing molding mixtures]. Lit’e i metallurgiya = Foundry production and metallurgy, 2014, no. 2, pp. 26–29.

3. Panasyugin A. S., Lomonosov V.A., Smorygo O. L. Ispolzovanie adsorbtsionno-kataliticheskogo metoda dlya ochistki vybrosov v atmosferu, obrazuyuschikhsya pri ispolzovanii antiprigarnykh pokrytiy, soderzhaschikh etilovyy spirt [The use of the adsorptioncatalytic method for purification of air emissions generated under use of non-stick coatings containing ethyl alcohol]. Lit’e i metallurgiya = Foundry production and metallurgy, 2014, no. 4, pp. 44–46.

4. Panasyugin A. S., Tsyganov A. R., Grigoriev S. V. et. al. Obezvrezhivanie parov propanola i izopropanola adsorbtsionnokataliticheskim metodom [Neutralization of propanol and isopropanol vapors by the adsorption-catalytic method]. Lit’e Ukrainy = Ukraine Foundary production, 2017, no. 3, pp. 2–5.

5. Panasyugin A. S., Tsyganov A. R., Grigoriev S. V. et. al. Obezvrezhivanie parov odnoatomnykh spirtov С1-С5 adsorbtsionnokataliticheskim metodom [Neutralization of vapors of monohydric alcohols С1-С5 by the adsorption-catalytic method]. Lit’e Ukrainy = Ukraine Foundary production, 2017, no. 7, pp. 2–8.

6. Tsyganov A. R., Panasyugin A. S., Pavlovskiy N. D., Masherova N. P. Obezvrezhivanie parov odnoatomnykh spirtov С1-С5 i ikh izomerov adsorbtsionno-kataliticheskim metodom [Neutralization of vapors of monohydric alcohols С1-С5 and their isomers by the adsorption-catalytic method]. Neftekhimiya-2018: materialy I Mezhdunarodnogo nauchno-tekhnicheskogo foruma po khimicheskim tekhnologiyam i neftepererabotke, Minsk, noyabr 27–30, 2018 = Petrochemistry-2018: materials of the I International Scientific and technical Forum on Chemical Technologies and on oil processing. Minsk, November 27–30, 2018. In 2 parts. Minsk, BGTU Publ., 2018, part 1, pp. 67–70.

7. Lomonosov V.A., Panasyugin A. S., Smorygo O. L., Mikutskiy V.A. et al. Pd/γ-Al2O3 catalysts on cellular supports for VOC vapor neutralization. Catalysis in Industry, 2010, vol. 2, no. 4, pp. 387–392.

8. Tsyganov A. R., Panasyugin A. S., Pavlovskiy N. D. et al. Obezvrezhivanie parov proizvodnykh benzola adsorbtsionnokataliticheskim metodom [Neutralization of benzene derivatives vapors by adsorption-catalytic method]. Lit’e Ukrainy = Ukraine Foundary production, 2019, no. 6, pp. 2–5.

9. Tsyganov A. R., Panasyugin A. S., Pavlovskiy N. D. et al. Obezvrezhivanie parov efirov uksusnoy kisloty adsorbtsionnokataliticheskim metodom [Neutralization of vapors of acetic acid esters by adsorption-catalytic method]. Lit’e Ukrainy = Ukraine Foundary production, 2019, no. 10, pp. 4–8.

10. Tsyganov A. R., Panasyugin A. S., Pavlovskiy N. D., Masherova N. P. Neytralizatsiya parov ketona i etiltsellozol’va adsorbtsionno-kataliticheskim metodom [Neutralization of ketone and ethyl cellosolve vapors by the adsorption-catalytic method]. Neftekhimiya-2019: materialy II Mezhdunarodnogo nauchno-tekhnicheskogo investitsionnogo foruma po khimicheskim tekhnologiyam i neftegazopererabotke, Minsk, oktyabr 16–18, 2019 = Petrochemistry-2019: materials of the II International Scientific, Technical and Investment Forum on Chemical Technologies and oil gas Processing. Minsk, October 16–18, 2019. Minsk, BGTU Publ., 2019, pp. 28–32.

11. Panasyugin A. S., Silina T. V., Grigoriev S. V., Pavlovskiy N. D., Masherova N. P. Obezvrezhivanie parov izomerov amilovogo spirta adsorbtsionno-kataliticheskim metodom [Neutralization of vapors of amyl alcohol isomers by the adsorption-catalytic method]. Lit’e Ukrainy = Ukraine Foundary Production, 2017, no. 5, pp. 12–16.


Review

For citations:


Panasyugin A.S., Masherova N.P., Tsyganov A.R., Pavlovsky N.D. Neutralization of solvent vapors of brand 646 by the adsorption-catalytic method. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2021;(1):130-136. (In Russ.) https://doi.org/10.21122/1683-6065-2021-1-130-136

Views: 2342


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 1683-6065 (Print)
ISSN 2414-0406 (Online)