Study of working conditions in aluminum casting shops worksites
https://doi.org/10.21122/1683-6065-2021-1-149-154
Abstract
The results of the study of working conditions in aluminum casting shops worksites are presented. The results of these studies showed that in worksites there are exceedance of the permissible limits for noise, vibration, the content of harmful substances in the working environment, intensity of infrared (thermal) radiation and air temperature. There is effect of electromagnetic radiation on the workers during the service of induction furnaces. In addition, the main harmful production factors include the severity of work and the intensity of the labor process. The efficiency of the protective screens of the IAT-6 induction crucible furnace was evaluated.
About the Authors
A. M. Lazarenkov
Belarusian National Technical University
Belarus
Belarusian National Technical University
Belarus
Belarusian National Technical University
I. A. Ivanov
Belarusian National Technical University
Belarus
Belarusian National Technical University
Belarus
Belarusian National Technical University
References
1. Vitjaz’ P.A., Tolstoj A. V., Sadoha M.A. Analiz sostojanija litejnyh proizvodstv Respubliki Belarus’ [Analysis of the state of the foundries of the Republic of Belarus]. Lit’e i metallurgiya = Foundry production and metallurgy, 2019, no. 3, pp.35–40.
2. Mel’nikov A.P., Sadoha M.A. Novye nauchno-tehnicheskie razrabotki dlja modernizacii i tehnicheskogo pereosnashhenija litejnyh proizvodstv [New scientific and technical developments for modernization and technical re-equipment of foundries]. Lit’e i metallurgiya = Foundry production and metallurgy, 2011, no. 3, pp.7–10.
3. Lazarenkov A. M., Horeva S.A. Analiz proizvodstvennyh faktorov litejnyh cehov [Analysis of production factors of foundries]. Trudy 24-j mezhdunarodnoj nauchno-tehnicheskoj konferencii «Litejnoe proizvodstvo i metallurgija 2016. Belarus’», Minsk, 19– 21 oktjabrja 2016 [Proceedings of the 24th International Scientific and Technical Conference “Foundry and Metallurgy 2016. Belarus», Minsk, 19–21 October 2016]. Minsk, 2016, pp. 117–120.
4. https://www.metalbulletin.ru.
5. Lazarenkov A. M. Uslovija truda rabotajushhih v litejnyh cehah [Working conditions of workers in foundries]. Lit’e i metallurgiya = Foundry production and metallurgy, 2018, no. 4, pp. 160–164.
6. Ivanova L. I., Grobova L. S., Sokunov B.A., Sarapulov S. F. Indukcionnye tigel’nye pechi [Induction crucible furnaces]. Ekaterinburg, UGTU-UPI Publ., 2002. 87 p.
7. Lazarenkov A. M., Horeva S.A. Vlijanie pyli v vozduhe rabochih mestah na professional’nuju zabolevaemost’ rabotajushhih v litejnyh cehah [Influence of dust in the air at workplaces on the occupational morbidity of workers in foundries]. Trudy 24-j mezhdunarodnoj nauchno-tehnicheskoj konferencii «Litejnoe proizvodstvo i metallurgija 2016. Belarus’», Minsk, 19–21 oktjabrja 2016 [Proceedings of the 24th International Scientific and Technical Conference “Foundry and Metallurgy 2016. Belarus», Minsk, 19–21 October 2016]. Minsk, 2016, pp. 115–116.
8. Lazarenkov A. M., Horeva S.A., Mel’nichenko V. V. Prognozirovanie soderzhanija vrednyh veshhestv v vozduhe rabochih zon uchastkov litejnyh cehov [Prediction of the content of harmful substances in the air of working areas of foundry sections]. Lit’e i metallurgiya = Foundry production and metallurgy, 2012, no. 3, pp. 79–81.
9. https://mosinductor.ru/info/articles/elektromagnitnoe-izluchenie-induktsionnoy-pechi/
10. http://metodichka.x-pdf.ru/15stroitelstvo/65578–3-analiz-opasnih-vrednih-proizvodstvennih-faktorov-liteynom-proizvodstvemetodicheskie-ukazaniya-dlya-studentov-special.php
Review
For citations:
Lazarenkov A.M., Ivanov I.A. Study of working conditions in aluminum casting shops worksites. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2021;(1):149-154. (In Russ.) https://doi.org/10.21122/1683-6065-2021-1-149-154
Views:
422
Email this article 