Quantitative methods for assessing the microstructure of steel and alloys for revising outdated GOST standards
https://doi.org/10.21122/1683-6065-2021-2-42-48
Abstract
The current state of GOST, which regulates the quality of the structure of steels and alloys, has significantly lagged behind the progress in the compositions and technologies for obtaining modern steels and alloys. Using the example of microstructural banding of steel, it is shown how to overcome this gap and bring the methodology developed in Russia to the level of interstate GOST.
Other problems of quantitative evaluation of structural components of steels and alloys that can become the basis of industry, national and interstate standards are considered: microstructural heterogeneity of sheet metal; non-metallic inclusions in steel, including automation of GOST 1778-70, evaluation methods using the ASTM E1245 methodology and statistics of extreme values, as well as automatic particle analysis; central axial inhomogeneity of a slab; liquation strip in sheet metal; the proportion of coarse bainite blocks used to describe the properties of modern pipe steels; the structure of joints after multi-pass welding; the metallurgical quality of heat-resistant nickel alloys; the structure of alloys treated in a semi-solid state; the structure of pre-eutectic silumins; non-metallic inclusions in aluminum alloys (PoDFA method); the structure of high-strength cast iron; grain size distribution.
About the Authors
A. A. Kazakov
“Tiksomet” LLC
Russian Federation
St. Petersburg
Russian Federation
St. Petersburg
D. V. Kiselev
“Tiksomet” LLC
Russian Federation
St. Petersburg
Russian Federation
St. Petersburg
E. A. Kazakova
“Tiksomet” LLC
Russian Federation
St. Petersburg
Russian Federation
St. Petersburg
References
1. Kazakov A.A., Kiselev D. V. Industrial Application of Thixomet Image Analyzer for Quantitative Description of Steel and Alloys. Metallogr., Microstruct., Anal., 2016, Vol.5, No. 4, pp. 294–301, http://dx.doi.org/10.1007/s13632–016–0289–6.
2. Kazakov A.A., Kiselev D. V., Andreeva S. V., Chigincev L. S., Golovin S. V., Egorov V.A., Markov S. I. Razrabotka metodiki kolichestvennoj ocenki mikrostrukturnoj poloschatosti nizkolegirovannyh trubnyh stalej s pomoshh’ju avtomaticheskogo analiza izobrazhenij [Development of a technique for quantitative assessment of microstructural banding of low‑alloy pipe steels using automatic image analysis]. Chernye metally = Black metals, 2007, no. 7–8, pp. 31–37.
3. ASTM E1268–01(2016), Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures, ASTM International, West Conshohocken, PA, 2016, www.astm.org.
4. Kazakov A.A., Kiselev D.V, Kazakova E. I., Vander Voort G. F., Chigintsev L. Quantitative Description of Microstructural Banding in Steels. Materials Performance and Characterization, https://doi.org/10.1520/MPC20160009. ISSN 2165–3992.
5. Kazakov A.A., Vander Voort G. F., Kiselev D.V, Kazakova E. I. ASTM E1268: From Improvement to the New Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures by Automatic Image Analysis” 100 Years of E04 Development of Metallography Standards, ASTM STP1607. http://dx.doi.org/10.1520/STP1607201702063.
6. ASTM E1268‑18, Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures, ASTM International, West Conshohocken, PA, 2018, www.astm.org.
7. ASTM E1268‑19, Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures, ASTM International, West Conshohocken, PA, 2019, www.astm.org.
8. GOST5640‑2020. STAL. Stal’. Metallograficheskij metod ocenki mikrostruktury prokata stal’nogo ploskogo [State Standart 5640–2020. STEEL. Steel. Metallographic method for evaluating the microstructure of flat steel rolled products].
9. Kazakov A.A., Kiselev D. V., Sych O. V., Hlusova E.I. Metodika ocenki mikrostrukturnoj neodnorodnosti po tolshhine listovogo prokata iz hladostojkoj nizkolegirovannoj stali arkticheskogo primenenija [Methods for assessing the microstructural heterogeneity in thickness of sheet products made of cold‑resistant low‑alloy steel for Arctic applications]. Chernye metally = Black metals, 2020, no. 9, pp. 11–19.
10. Kazakov A.A., Kiselev D. V., Sych O. V., Khlusova E. I. Quantitative Assessment of Microstructural Inhomogeneity by Thickness of Hot‑Rolled Plates Made of Cold‑Resistant Low‑Alloy Steel for Arctic Applications, CIS Iron and Steel Review, 2020, Vol. 20, pp. 41–49.
11. Kazakov A.A., Kiselev D. V., Sych O. V., Hlusova E. I. Kolichestvennaja ocenka strukturnoj neodnorodnosti v listovom prokate iz hladostojkoj nizkolegirovannoj stali dlja interpretacii tehnologicheskih osobennostej ego izgotovlenija [Quantitative Assessment of Structural Inhomogeneity in Cold‑Resistant Low‑Alloy Steel Sheets for Interpretation of the Technological Features of Its Manufacturing]. Chernye metally = Black metals, 2020, no. 11, pp. 4–14.
12. Kazakov A.A., Kiselev D. V., Andreeva S. V., Mjasnikov A.A., Golovin S. V., Egorov V.A. Razrabotka metodiki kolichestvennoj ocenki zagrjaznennosti nizkolegirovannyh trubnyh stalej nemetallicheskimi vkljuchenijami s pomoshh’ju avtomaticheskogo analiza izobrazhenij [Development of a method for quantitative assessment of contamination of low‑alloy pipe steels with non‑metallic inclusions using automatic image analysis]. Chernye metally = Black metals, 2007, no. 7–8, pp. 24–31.
13. Kazakov A.A., Zhitenev A. I., Kolpishon Je. Ju., Salynova M.A. Kolichestvennaja ocenka nemetallicheskih vkljuchenij dlja pokovok iz sverhkrupnyh slitkov [Quantification of nonmetallic inclusions for extra large ingot forgings]. Chernye metally = Black metals, 2018, no.7, pp. 50–56.
14. Kazakov A.A., Zhitenev A. I., Salinova M.A. Extension of ASTM E2283 standard practice for the assessment of large exogenous nonmetallic inclusions in super duty steels. CIS Iron and Steel Review, 2019, vol. 18, pp. 20–26.
15. Kazakov A.A., Zhitenev A. I., Salynova M.A. Rasshirenie vozmozhnostej statistiki jekstremal’nyh znachenij dlja ocenki prirody krupnyh nemetallicheskih vkljuchenij v staljah otvetstvennogo naznachenija [Expanding the capabilities of extreme value statistics for assessing the nature of large non‑metallic inclusions in critical steels]. Chernye metally = Black metals, 2019, no. 8, pp.46–50.
16. Kazakov A.A., Ljubochko D.A., Rjaboshuk S. V., Chigincev L. S. Issledovanie prirody nemetallicheskih vkljuchenij v stali s pomoshh’ju avtomaticheskogo analizatora chastic [Investigation of the nature of non‑metallic inclusions in steel using an automatic particle analyzer]. Chernye metally = Black metals, 2014, no. 4 (988), pp. 37–42.
17. Kazakov A.A., Zhitenev A., Ryaboshuk S. Interpretation and Classification of Non‑Metallic Inclusions. Materials Performance and Characterization. https://doi.org/10.1520/MPC20160040. ISSN 2165–3992.
18. Kazakov A.A., Chigincev L. S., Kazakova E. I., Rjaboshuk S. V., Markov S. I. Metodika ocenki likvacionnoj polosy listovogo prokata [Methodology for evaluating liquation strip of sheet metal]. Chernye metally = Black metals, 2009, no. 12, pp. 17–22.
19. Kazakov A.A., Kazakova E. I., Kur A.A. Assessment of central heterogeneity in slab to forecast centerline segregation in plate steel. CIS Iron and Steel Review, 2018, vol. 16, pp. 49–52.
20. Kazakov A.A., Kiselev D. V., Pakhomova O. Microstructural quantification for pipeline steel structure‑property relationships. CIS Iron and Steel Review, 2012, pp. 4–12.
21. Zolotorevsky N., Kazakova E., Kazakov A., Petrov S., Panpurin S. Investigation of the Origin of Coarse‑Grained Bainite in X70 Pipeline Steels by EBSD Technique. Materials Performance and Characterization, https://doi.org/10.1520/MPC20160031.
22. Kazakov A., Kazakova E., Karasev M., Lubochko D. Structural Investigation and Control of Multi‑Pass Gas‑Shielded FluxCored Arc Weldments. Materials Performance and Characterization, https://doi.org/10.1520/MPC20160035.
23. Kazakov A.A., Karasev M. V., Kazakova E. I. Vlijanie struktury na svojstva nizhnih sloev svarnyh shvov pri mnogoprohodnoj jelektrodugovoj svarke stali 09G2FBJu poroshkovoj provolokoj v srede zashhitnyh gazov [Influence of the structure on the properties of the lower layers of welded joints in multipass electric arc welding of steel 09G2FBYU with flux‑cored wire in a shielding gas environment]. Svarka i diagnostika = Welding and diagnostics, 2017, no.4, pp. 47–54.
24. Kazakov A. A., Kiselev D. V. Metallurgical Quality Characterization of Nickel‑Based Superalloys. CIS Iron and Steel Review, 2007, no. 1–2, pp. 40–43.
25. Kazakov A. A., Luong N. H. Characterization of Semisolid Materials Structure. Mater. Character., 2001, vol. 46, no. 2–3, pp. 155–161.
26. Kazakov A., Kur A., Kazakova E., Kiselev D. Quantitative Characterization of Hypoeutectic Aluminum–Silicon–Copper AsCast Alloy Microstructures. Materials Performance and Characterization. https://doi.org/10.1520/MPC20160025.
27. Kazakov A.A., Kur A.A., Kiselev D. V., Lazutova E. B. Razrabotka kolichestvennyh metodov ocenki struktury dojevtekticheskih siluminov dlja prognozirovanija ih mehanicheskih svojstv [Development of quantitative methods for assessing the structure of hypoeutectic silumins to predict their mechanical properties]. Cvetnye metally = Non-ferrous metals, 2014, no. 4, pp. 39–43.
28. Kazakov A.A., Kiselev D. V., Kur A.A. Avtomatizirovannaja ocenka nemetallicheskih vkljuchenij v aljuminievyh splavah po metodike PoDFA s pomoshh’ju analiza izobrazhenij [Automated assessment of non‑metallic inclusions in aluminum alloys by PoDFA method using image analysis]. Cvetnye metally = Non-ferrous metals, 2019, no. 3(915), pp. 43–51.
29. Kazakov A.A., Andreeva S. V., Kiselev D. V. Kolichestvennaja ocenka parametrov struktury vysokoprochnogo chuguna kak osnova prognozirovanija mehanicheskih svojstv [Quantitative Assessment of the Structure Parameters of Ductile Iron as a Basis for Predicting Mechanical Properties]. SPbGTU Publ., 2009, no. 510, pp. 200–208.
30. Vander Voort G. F., Pakhomova O., Kazakov A. Evaluation of Normal Versus Non‑Normal Grain Size Distributions. Materials Performance and Characterization. https://doi.org/10.1520/MPC20160001. ISSN 2165–3992.
Review
For citations:
Kazakov A.A., Kiselev D.V., Kazakova E.A. Quantitative methods for assessing the microstructure of steel and alloys for revising outdated GOST standards. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2021;(2):42-48. (In Russ.) https://doi.org/10.21122/1683-6065-2021-2-42-48
Views:
624
Email this article 