Controlling the drawability of carbon steel wire rod
https://doi.org/10.21122/1683-6065-2021-3-61-64
Abstract
The author proposed an indicator of the deformation capacity of carbon steel wire rod, which took into account the tendency of the metal to hardening and the general level of plastic properties, and determined technological approaches to the designation of the optimal total reduction before intermediate heat treatment by drawing low carbon wire rod and wire rod for metal cord.
References
1. Fetisov V. P. Deformacionnoe uprochnenie uglerodistoj stali [Carbon steel strain hardening]. Moscow, Mir Publ., 2005, 200 p.
2. Moroz P., Donald F., James J. The role of optical and electron microscopy in evalusting lead patented high‑carbon steel rods. Wire, 1974, vol 1. Р. 51–59.
3. Fetisov V. P. Ocenka plastichnosti pri deformacii uglerodistoy stali. Evaluation of plasticity during deformation of carbon steel // Lit'e i metallurgiya= Foundry production and metallurgy. 2019, no. 3, pp. 85–88.
4. Gridnev V. N., Gavriljk V. G., Meshkov Ju. Ja. Prochnost’ i plastichnost’ holodnodeformirovannoj stali [Stregth and ductility of cold‑rolled steel]. Kiev, Naukova dumka Publ., 1974, 231 p.
5. Fetisov V. P. Deformacionnoe starenie stali pri volochenii provoloki [Deformational aging of steel during wire drawing]. Minsk, Belorgstankinpromizdat Publ., 1996, 120 p.
Review
For citations:
Fetisov V.P. Controlling the drawability of carbon steel wire rod. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2021;(3):61-64. (In Russ.) https://doi.org/10.21122/1683-6065-2021-3-61-64
Views:
392
Email this article 