Investigation of the effect of vacuum on the curing of mixtures on a silicate binder
https://doi.org/10.21122/1683-6065-2021-3-82-87
Abstract
The article presents the results of a study of the effect of vacuuming on the curing processes of liquid‑glass mixtures. The method of conducting experiments using an original laboratory vacuum installation and the mechanisms of curing a liquid‑glass mixture with various hardening methods are described. Studies have shown that vacuuming can signifi antly accelerate the curing and increase the strength of the mixture while reducing the content of the silicate binder. This; in turn; facilitates the knockability of liquid‑glass mixtures and expands the prospects for using these environmental friendly mixtures in foundry as an alternative to sands based on organic binders.
About the Authors
O. A. Rusevich
Belarusian National Technical University
Belarus
Minsk; Belarus; 65; Nezavisimosty Ave.
Belarus
Minsk; Belarus; 65; Nezavisimosty Ave.
S. L. Rovin
Belarusian National Technical University
Belarus
Minsk; Belarus; 65; Nezavisimosty Ave.
Belarus
Minsk; Belarus; 65; Nezavisimosty Ave.
References
1. Boldin A. N. et al. Jekologija litejnogo proizvodstva. [Foundry ecology]. Brjansk; BGTU Publ.; 2001. 315 p.
2. Kukuj D. M.; Andrianov N. V. Teorija i tehnologija litejnogo proizvodstva. Formovochnye materialy i smesi [Foundry theory and technology. Molding materials and mixtures]. Minsk; BNTU Publ.; 2005. 391 p.
3. Korneev V. I.; Danilov V. V. Rastvorimoe i zhidkoe steklo [Soluble and liquid glass]. Sankt‑Peterburg; Strojizdat Publ.; 1996. 216 p.
4. Gal’perin N. I. Osnovnye processy i apparaty himicheskoj tehnologii. V dvuh knigah [Basic processes and apparatuses of chemical technology. In two books]. Moscow; Himija Publ.; 1981. 812 p.
5. Guminskij Ju. Ju.; Rovin S. L.; Rusevich O.A. Perspektivy primenenija vakuumirovanija dlja otverzhdenija zhidkostekol’nyh smesej [Application possibility of vacuum for hardering of liquid glass mixtures]. Litejshhik Rossii = Foundryman of Russia; 2021; no. 1; pp. 34–37.
6. Ljass; A. M. Fazovye prevrashhenija v ZhSS s zhidkim steklom pri vysokih temperaturah i ih svjaz’ s tehnologicheskimi svojstvami [Phase transformations in fluid self‑hardening mixtures with liquid glass at high temperatures and their relationship with technological properties]. Moscow; Mashinostroenie Publ.; 1979. 207 p.
7. Illarionov I. E.; Petrova N. V. Zhidkostekol’nye smesi; otverzhdaemye produvkoj uglekislym gazom [Liquid glass mixtures hardened by carbon dioxide purge] Trudy Nizhegorodskogo gosudarstvennogo tehnicheskogo universiteta im. R. E. Alekseeva = Proceedings of the Nizhny Novgorod State University named after R. E. Alekseev; 2011; no. 2; pp. 208–213.
Review
For citations:
Rusevich O.A., Rovin S.L. Investigation of the effect of vacuum on the curing of mixtures on a silicate binder. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2021;(3):82-87. (In Russ.) https://doi.org/10.21122/1683-6065-2021-3-82-87
Views:
300
Email this article 