Laser treatment impact on the fabric 07C11-KV surface and its coating with zirconium
https://doi.org/10.21122/1683-6065-2022-1-91-95
Abstract
The results of laser radiation interaction with woven fabrics and coatings on them can be used as a basis for new technological processes. The morphology of the surface of a pure mixed fabric 07C11-KV (Mogotex) is studied and this fabric with a zirconium coating after laser exposure in the dual pulse mode. The modes under which tissue destruction occurs as a result of melting of the material under the action of a concentrated stream of laser radiation are established. It is shown that laser exposure in the twopulse mode in the energy range from 10 to 20J leads to complete material destruction with fabric edges melting.
About the Authors
A. G. Anisovich
Physical-Technical Institute of the National Academy of Sciences of Belarus
Belarus
Minsk, Belarus, 10, Kuprevich str.
Belarus
Minsk, Belarus, 10, Kuprevich str.
I. P. Akula
Physical-Technical Institute of the National Academy of Sciences of Belarus
Belarus
Minsk, Belarus, 10, Kuprevich str.
Belarus
Minsk, Belarus, 10, Kuprevich str.
A. P. Laskovnev
Physical-Technical Institute of the National Academy of Sciences of Belarus
Belarus
Minsk, Belarus, 10, Kuprevich str.
Belarus
Minsk, Belarus, 10, Kuprevich str.
V. I. Zhuravleva
Military Academy of the Republic of Belarus
Belarus
Belarus
Minsk, Belarus, 220, Nezavisimosti ave.
M. I. Markevich
Physical-Technical Institute of the National Academy of Sciences of Belarus
Belarus
Minsk, Belarus, 10, Kuprevich str.
Belarus
Minsk, Belarus, 10, Kuprevich str.
N. M. Chekan
Physical-Technical Institute of the National Academy of Sciences of Belarus
Belarus
Minsk, Belarus, 10, Kuprevich str.
Belarus
Minsk, Belarus, 10, Kuprevich str.
References
1. Vejko V. P., Metev S. M. Lazernye tehnologii v mikrojelektronike [Laser technologies in microelectronics]. Sofija, Bolgarskaja Akademija Nauk Publ., 1991, 358 p.
2. Hisamieva L. G., Giljazova A.A., Petrova A.A., Badrutdinova A. N. Dekorirovanie poverhnosti polimernyh materialov s pomoshh’ju lazernoj tehnologii [Surface decoration of polymeric materials using laser technology]. Vestnik Kazanskogo tehnologicheskogo universiteta = Bulletin of Kazan Technological University, 2012, no. 11, pp. 127–128.
3. Markevich M. I., Chaplanov A. M. Strukturnye prevrashhenija v tonkih metallicheskih plenkah pri impul’snom lazernom vozdejstvii [Structural transformations in thin metal films under pulsed laser action]. Izvestija Nacional’noj akademii nauk Belarusi = Proceedings of the National Academy of Sciences of Belarus, Physical-Technical series. 2016, no. 1, pp. 28–34.
4. Anisovich A. G., Zalesskij V. G., Markevich M. I., Malyshko A. N., Zhuravleva V. I. Chekan N. M., Chjen’ Chao. Vozdejstvie lazernogo izluchenija na lavsanovuju tkan’, pokrytuju uglerodom [Effect of laser radiation on lavsan fabric coated with carbon]. Polimernye materialy i tehnologii = Polymeric materials and technologies, 2020, vol. 6, no. 1, pp. 72–77.
5. Vorob’ev V. S. Plazma, voznikajushhaja pri vzaimodejstvii lazernogo izluchenija s tverdymi mishenjami [Plasma arising from the interaction of laser radiation with solid targets]. UFN = UFN, 1993, vol. 163(12), pp. 51–83.
Review
For citations:
Anisovich A.G., Akula I.P., Laskovnev A.P., Zhuravleva V.I., Markevich M.I., Chekan N.M. Laser treatment impact on the fabric 07C11-KV surface and its coating with zirconium. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2022;(1):91-95. (In Russ.) https://doi.org/10.21122/1683-6065-2022-1-91-95
Views:
1713
Email this article 