Research and processing of shot blasting dust
https://doi.org/10.21122/1683-6065-2022-2-34-39
Abstract
Dispersed iron‑containing waste makes up the lion’s share of solid technological waste of machine‑building enterprises. Most of this waste is still exported and buried in industrial landfills, while not only losing a signifi ant amount of metal, but also causing serious damage to the environment. At the same time, the modern state of technology and technologies, in particular, technologies developed by Belarusian scientists for recycling dispersed metal waste, make it possible to efficiently and cost‑effectively extract metals from most of the generated waste. This article presents the results of a study of the dust of shot‑blasting cleaning of castings formed in steel and iron foundries, and proposals for its processing and recycling of the metal contained in it.
About the Authors
S. L. Rovin
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
V. A. Sheinert
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
S. V. Grigoriev
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
E. V. Teleshova
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
References
1. Kabanov Y.A., Stolyarskij O.A., Agapeev E. N. Izvlechenie i podgotovka k ispol`zovaniyu skrapa iz otval`ny`x staleplavil`ny`x shlakov [Extraction and preparation for use of scrap from dump steelmaking slags] Metallurg= Metallurgist, 2006, no. 1, pp. 80–81.
2. Safronov N. N. Osnovy teorii i tekhnologii utilizacii dispersnyh othodov mashinostroeniya v proizvodstve fasonnyh otlivok iz chernyh metallov. Diss. dokt. tehn. nauk [Fundamentals of the theory and technology of utilization of dispersed mechanical engineering waste in the production of shaped castings from ferrous metals. Dr. tech. sci. diss.]. Moscow, 2000, 32 p.
3. Urbanovich N. I., Korneev S. V., Volosatikov V. I., Komarov D. O. Analiz sostava i texnologij pererabotki dispersny`x zhelezosoderzhashhix otxodov [Analysis of the composition and processing technologies of dispersed iron‑containing waste] Lit`e i metallurgiya = Foundry production and metallurgy, 2021, no. 4, pp. 66–69.
4. D`yakonov O. M. Kompleksnaya pererabotka struzhki i metallosoderzhashhix shlamov [Complex processing of chips and metal‑containing slurries]. Minsk, Texnologiya Publ., 2012, 262 p.
5. Rovin S. L. Recikling metallootxodov v rotacionnyh pechah [Recycling of metal waste in rotary kilns]. Minsk, BNTU Publ., 2015, 382 p.
6. Rovin S. L., Rovin L. E., Nasevich I. S. Primenenye rotacionnyh pechej dlja plavki chernyh splavov [Analysis of the composition and processing technologies of dispersed iron‑containing waste] Lit`e i metallurgiya = Foundry production and metallurgy, 2021, no. 1, pp. 9–13.
Review
For citations:
Rovin S.L., Sheinert V.A., Grigoriev S.V., Teleshova E.V. Research and processing of shot blasting dust. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2022;(2):34-39. (In Russ.) https://doi.org/10.21122/1683-6065-2022-2-34-39
Views:
492
Email this article 