Structural aspects of deformation hardening with repeated drawing low carbon wire
https://doi.org/10.21122/1683-6065-2022-2-44-49
Abstract
While repeated drawing of low carbon wire, a decrease in the grain size of ferrite reduces the parameters of deformation hardening in the initial field of deformations with parabolic hardening and increases in the field of substructural hardening with large and extra‑large total compressions. The transition from large to super‑large total deformations goes along with the development of dynamic return processes that reduce the rate of deformation hardening. Preliminary thermal softening of cold‑formed wire increases the strength gain during subsequent drawing and can be used to increase the total compression of the wire rod before intermediate heat treatment.
References
1. Langford G., Cohen M. Strain hardening of iron by severe plastic deformation. Trans. Amer. Soc. Met., 1969, vol. 62, no. 3, pp. 623–638.
2. Embury J., Keh A., Fisher R. Substructural Strengthening in Materials Subject to Large Plastic Strains. Trans. Met. Soc. AIME, 1966, vol. 236, no. 9, pp. 1252–1260.
3. Aernoudt E. Materials Response to Wiredrawing. Wire Journal, 1989, vol. 22, no. 3, pp. 53, 55–56, 59–60, 62, 65, 69, 75.
4. Bojazitov M. I., Piguzov Ju. V. Vlijanie velichiny zerna na vysotu 40º‑nogo maksimuma vnutrennego trenija [Influence of the grain size on the height of the 40º maximum of internal friction]. FMM = FMM, 1965, vyp.4, vol. 20, pp. 632–634.
5. Fridel’ Zh. Dislokacii [Locations]. Moscow, Mir Publ., 1967, 643 p.
6. Sokolov L. D., Skudnov V.A., Soljonov V. M., Gladkih A. N.et al. Mehanicheskie svojstva redkih metallov [Mechanical properties of rare metals]. Moscow, Metallurgija Publ., 1972, 288 p.
7. Vishnjakov Ja. D. Sovremennye metody issledovanija struktury deformirovannyh kristallov [Modern methods for studying the structure of deformed crystals]. Moscow, Metallurgija Publ., 1975, 480 p.
8. Fetisov V. P. Deformacionnoe uprochnenie uglerodistoj stali [Work hardening of carbon steel]. Moscow, Mir Publ., 2005, 200 p.
9. Fetisov V. P. Kontrol’ sposobnosti k volocheniju katanki iz uglerodistoj stali [Controling the drawability of carbon steel wire rod]. Lit’e i metallurgija = Foundry production and metallurgy, 2021, no. 3, pp. 61–64.
Review
For citations:
Fetisov V.Р. Structural aspects of deformation hardening with repeated drawing low carbon wire. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2022;(2):44-49. (In Russ.) https://doi.org/10.21122/1683-6065-2022-2-44-49
Views:
299
Email this article 