Method of temperature control and duration of aging of beryllium bronze products
https://doi.org/10.21122/1683-6065-2022-2-104-110
Abstract
A non‑destructive X‑ray diffraction control method has been developed to determine the temperature and duration of aging of beryllium bronze products. The control method is based on the dependences of the magnitude of the interplane distance of the released phase and the broadening of the diffraction line of the solid solution on the aging regime. To implement the developed control method, the dependences of the broadening of the diffraction line of the solid solution and the magnitude of the interplane reflection distance 100 of the released phase on the duration of aging at different temperatures are preliminarily determined. According to these dependencies, a nomogram is built, which is later used to control aging regimes. It is established that the reliability of determining the heat treatment mode depends on the instrumental factor associated with the difference in the geometric shape of the membranes of the elements, as well as on the amount of texture that occurs during plastic deformation of the material at the technological stages of product manufacturing. A method is proposed to minimize the influence of these factors on the accuracy of measurements.
About the Author
A. V. Tolstoy
Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus
Belarus
Minsk, Belarus, 12, Akademicheskaya str.
Belarus
Minsk, Belarus, 12, Akademicheskaya str.
References
1. Tolstoj A. V. Nerazrushajushhij metod kontrolja termicheskoj obrabotki izdelij iz berillievoj bronzy [Non‑destructive method for monitoring the heat treatment of products made of beryllium bronze]. Materialy, tehnologii, instrumenty = Materials, technologies, tools, 2007, vol. 12, no. 4, pp. 97–102.
2. Tolstoj A. V. Difrakcija rentgenovskih luchej na moshhnyh anizotropnyh poljah uprugih atomnyh smeshhenij polikristallov splava med’‑berillij [X‑ray diffraction by powerful anisotropic fields of elastic atomic displacements of copper‑beryllium alloy polycrystals]. Fizika metallov i metallovedenie = Physics of metals and metal science, 1991, no. 6, pp. 173–180.
3. Gitgarc M. I., Tolstoj A. V. Jevoljucija struktury i kinetika vydelenija dispersnoj fazy v splave med’‑berillij [Evolution of the structure and kinetics of precipitation of the dispersed phase in copper‑beryllium alloy]. Fizika metallov i metallovedenie = Physics of metals and metal science, 1989, vol. 67, no. 3, pp. 547–556.
4. Tolstoj A. V. Relaksacija polej uprugih mezhfazovyh naprjazhenij v splave med’‑berillij [Relaxation of elastic interfacial stress fields in copper‑beryllium alloy]. Vesti NAN Belarusi, serija fiziko‑tehnicheskih nauk = Proceedings of the National Academy of Sciences of Belarus. Physical‑technical sciences series, 1996, no. 4, pp. 11–16.
5. Tolstoj A. V. Vlijanie holodnoj plasticheskoj deformacii na strukturu i svojstva splava med’‑berillij. Ι. Strukturnye prevrashhenija pri starenii deformirovannyh berillievyh bronz [Influence of cold plastic deformation on the structure and properties of copper‑beryllium alloy. Ι. Structural transformations during aging of deformed beryllium bronzes]. Materialy, tehnologii, instrumenty = Materials, technologies, tools, 2006, vol. 11, no. 1, pp. 11–17.
6. Honikomb R. Plasticheskaja deformacija metallov [Plastic deformation of metals]. Moscow, Mir Publ., 1972, 408 p.
7. Kukol’ V. V. Opredelenie polozhenija maksimuma Kα‑komponenta po profilju ushirennoj dubletnoj difrakcionnoj linii [Determining the position of the maximum of the Kα‑component from the profile of a broadened doublet diffraction line]. Zavodskaja laboratorija = Factory laboratory, 1965, vol. 31, no. 6, pp. 706–708.
Review
For citations:
Tolstoy A.V. Method of temperature control and duration of aging of beryllium bronze products. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2022;(2):104-110. (In Russ.) https://doi.org/10.21122/1683-6065-2022-2-104-110
Views:
306
Email this article 