Basic principles of the continuous casting technology development for machine‑building blanks
https://doi.org/10.21122/1683-6065-2022-3-48-52
Abstract
It is shown that during developing continuous casting technology, it is necessary to solve a number of tasks related to finding the optimal technology option, creating special equipment to expand the range of cast blanks and calculating optimal parameters. The profile, dimensions and material of the blanks determine the continuous casting method choice and the installation type. Designs of the most important components and mechanisms are being developed for the selected type of installation. For the selected design solution, based on the lesson learned and available research, optimal thermal and technological parameters of casting are calculated.
About the Authors
E. B. Demchenko
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
E. I. Marukovich
Institute of Technology of Metals of National Academy of Sciences of Belarus
Belarus
Mogilev, Belarus, 11, Bialynitskogo-Biruli str.
Belarus
Mogilev, Belarus, 11, Bialynitskogo-Biruli str.
References
1. Marukovich E. I., Demchenko E. B. Teplovye javlenija pri formirovanii nepreryvnoj otlivki [Thermal phenomena during the formation of a continuous casting]. Minsk, BNTU Publ., 2012, 208 p.
2. Marukovich E. I., Demchenko E. B., Ofengenden A.A. Uchjot vlijanija teploty peregreva rasplava na formirovanie zagotovki pri vertikal’nom nepreryvnom lit’e [Accounting for the influence of the heat of overheating of the melt on the formation of a workpiece in vertical continuous casting]. Metallurgija mashinostroenija = Metallurgy engineering, 2006, no. 2, pp.7–11.
3. Krutilin A. N., Grinberg V.A., Demchenko E. B., Filanovich I. K. K voprosu o prochnosti chuguna pri nepreryvnom lit’e [On the question of the strength of cast iron during continuous casting]. Metallurgija: respublikanskij mezhvedomstvennyj sbornik nauchnyh trudov = Metallurgy: republican interdepartmental collection of scientific papers, Minsk, Vyshjejshaja shkola Publ., 1987, vyp. 21, pp.46–48.
4. Demchenko E. B., Marukovich E. I. Formirovanie nepreryvnoj otlivki za predelami kristallizatora [Formation of a continuous casting outside the mold]. Vestnik BNTU = Bulletin of the Belarusian National Technical University, 2008, no.4, pp.31–34.
5. Tutov V. I., Grinberg V.A., Zemskov I. V., Demchenko E. B. Tehnologija i oborudovanie vertikal’nogo polunepreryvnogo lit’ja gil’z cilindrov [Technology and equipment for vertical semi‑continuous casting of cylinder liners]. Tehnologija i oborudovanie dlja poluchenija lityh chugunnyh zagotovok = Technology and equipment for producing cast iron blanks, Izhevsk, 1987, pp.19–20.
6. Zemskov I. V., Tul’ev V. D., Tutov V. I. Sposob nepreryvnogo lit’ja polyh cilindricheskih zagotovok i ustrojstvo dlja ego osushhestvlenija [Method for continuous casting of hollow cylindrical blanks and device for its implementation]. a. s. SU1811970, 30.04.1993.
7. Zemskov I. V., Krutilin A. N. Vertikal’noe nepreryvnoe lit’e zagotovok [Vertical continuous casting]. Minsk, BNTU Publ., 2015, 207 p.
8. Demchenko E. B. Rezhimy dvizhenija pri nepreryvnom lit’e i ih vlijanie na stabil’nost’ processa [Movement modes in continuous casting and their influence on process stability]. Vestnik BNTU = Bulletin of the Belarusian National Technical University, 2004, no. 3, pp. 21–25.
9. Marukovich E. I., Demchenko E. B. Raschjot predel’no dopustimoj skorosti vytjazhki nepreryvnoj otlivki [Calculation of the maximum allowable drawing speed of a continuous casting]. Aktual’nye problemy prochnosti: materialy 60-j Mezhdunarodnoj nauchnoj konferencii 14–18 maja 2018 g. = Actual problems of strength: materials of the 60th International Scientific Conference May 14–18, Vitebsk, 2018. Vitebsk, 2018, pp.108–110.
10. Demchenko E. B. Tehnologija nepreryvnogo lit’ja dlja proizvodstva trub [Continuous casting technology for pipe production]. Nauka – obrazovaniju, proizvodstvu, jekonomike. Materialy XIII mezhdunarodnoj nauchno-tehnicheskoj konferencii = Science – education, production, economics = Materials of the XIII International Scientific and Technical Conference. Minsk, BNTU Publ., 2015, vol. 1, pp. 343.
Review
For citations:
Demchenko E.B., Marukovich E.I. Basic principles of the continuous casting technology development for machine‑building blanks. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2022;(3):48-52. (In Russ.) https://doi.org/10.21122/1683-6065-2022-3-48-52
Views:
1805
Email this article 