Formation of the transition zone “matrix alloy – reinforcing granules” in the process of solid‑liquid synthesis of composite material
https://doi.org/10.21122/1683-6065-2022-3-96-100
Abstract
The paper is devoted to the formation of transition zone between matrix alloy and reinforcing phase (cast iron granules) during the synthesis of composite casted materials. Results on concentration distribution of main elements (Si, Fe, Cu) are presented. It is shown that the formation of transition zone starts during the infiltration process with further its growth during the exposition at synthesis temperature. As the result dissolution and distraction of granules take place.
About the Authors
A. S. Kalinichenko
Belarusian State Technological University
Belarus
Minsk, Belarus, 13a, Sverdlova str.
Belarus
Minsk, Belarus, 13a, Sverdlova str.
V. A. Kalinichenko
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave
Belarus
Minsk, Belarus, 65, Nezavisimosti ave
V. G. Luhin
Belarusian State Technological University
Belarus
Minsk, Belarus, 13a, Sverdlova str.
Belarus
Minsk, Belarus, 13a, Sverdlova str.
References
1. Mal’ceva L. A., Sharapova V.A. Zhidkofaznye tehnologii poluchenija kompozicionnyh materialov [Liquid‑phase technologies for the production of composite materials]. Ekaterinburg, Izdatel’stvo Ural’skogo universiteta Publ., 2013, 120 p.
2. Teorija i praktika lityh kompozicionnyh materialov [Theory and practice of cast composite materials]. Sbornik trudov Mezhdunarodnoj nauchno‑tehnicheskoj konferencii [Сollection of proceedings of the International Scientific and Technical Conference]. Vladimir, Izdatel’stvo VlGU Publ., 2019, 140 p.
3. Kartonova L. V. O probleme vybora kompozicionnyh materialov dlja zadannyh uslovij jekspluatacii [On the problem of choosing composite materials for given operating conditions]. Teorija i praktika lityh kompozicionnyh materialov = Theory and practice of cast composite materials. Vladimir, Izdatel’stvo VlGU Publ., 2019, pp. 104–107.
Review
For citations:
Kalinichenko A.S., Kalinichenko V.A., Luhin V.G. Formation of the transition zone “matrix alloy – reinforcing granules” in the process of solid‑liquid synthesis of composite material. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2022;(3):96-100. (In Russ.) https://doi.org/10.21122/1683-6065-2022-3-96-100
Views:
229
Email this article 