Methodology for assessing the dustiness of the air environment of the working areas of foundries
https://doi.org/10.21122/1683-6065-2022-4-132-136
Abstract
The content of harmful substances in the air is an important parameter of the working conditions of foundry workers. Due to the peculiarities of the technology, there are many sources of intense dust emission in the foundry. The distribution of dust concentrations in the atmosphere of the workshops was determined from the equation of the dust balance in the workshop room. The possibility of obtaining by calculation an objective picture of the distribution of dust in various sections of foundries is shown. Data from various studies were used to determine the density and dust at various sites of foundries. The results of the theoretical calculations show that in foundries, dust capture is an effective means of reducing the dustiness of the air of working areas.
About the Authors
A. M. Lazarenkov
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
M. A. Sadokha
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
T. P. Kot
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
A. A. Novik
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
References
1. Koptev D. V. K voprosu ob organizacii vozduhoobmena v cehah s pylevydelenijami [On the issue of organizing air exchange in workshops with dust emissions]. VCIIOT VCSPS = VCIIOT VCSPS, 1975, vyp. 96, pp. 14–21.
2. Minko V.A., Shaptala V. G., Podgornyj N. N. Opredelenie intensivnosti vydelenija pyli i kratnosti vozduhoobmena v cehah silikatnogo kirpicha [Determination of the intensity of dust emission and the frequency of air exchange in sand‑lime brick workshops]. Stroitel’nye materialy = Construction Materials, 1979, no. 9, pp. 22–23.
3. Koptev D. V. K voprosu o recirkuljacii vozduha pri ispol’zovanii obespylivajushhih ustrojstv [On the issue of air recirculation when using dedusting devices]. VCIIOT VCSPS = VCIIOT VCSPS, 1971, vyp. 72, pp. 24–26.
4. Minko V.A., Kuleshov M. I., Plotnikova L. V. Obespylivanie v litejnyh cehah mashinostroitel’nyh predprijatij [Dedusting in foundries of machine‑building enterprises]. Moscow, Mashinostroenie Publ., 1987, 224 p.
5. Shaptala V. G., Podgornyj N. N. Issledovanie dispersnogo sostava i intensivnosti osazhdenija vitajushhej pyli [Investigation of the dispersed composition and intensity of the deposition of floating dust]. Ispol’zovanie nerudnyh resursov zhelezorudnyh predprijatij dlja proizvodstva stroitel’nyh materialov = Use of non‑metallic resources of iron ore enterprises for the production of building materials, MISI i BTISM Publ., 1983, pp. 79–86.
6. Pirumov A. I. Obespylivanie vozduha [Air dedusting]. Moscow, Strojizdat Publ., 1981, 296 p.
7. Stark S. B. Pyleulavlivanie i ochistka gazov v metallurgii [Dust collection and gas purification in metallurgy]. Moscow, Metallurgija Publ., 1977, 328 p.
8. Puhirja V. I., Lebedjuk G. K., Viharev A. F. Sostav i obezvrezhivanie pylegazovyh vybrosov litejnyh cehov [Composition and neutralization of dust and gas emissions from foundries]. Sanitarno‑gigienicheskie i jekologicheskie problemy v litejnom proizvodstve = Sanitary‑hygienic and environmental problems in the foundry industry. Moscow, 1981, pp. 93–98.
9. Lazarenkov A. M. Issledovanie vozduha rabochih zon litejnyh cehov [Study of the air in the working areas of foundries]. Lit’e i metallurgija = Foundry production and metallurgy, 2019, no. 2, pp. 138–142.
Review
For citations:
Lazarenkov A.M., Sadokha M.A., Kot T.P., Novik A.A. Methodology for assessing the dustiness of the air environment of the working areas of foundries. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2022;(4):132-136. (In Russ.) https://doi.org/10.21122/1683-6065-2022-4-132-136
Views:
217
Email this article 