Technological aspects of processing steel products in powder mixtures containing hot‑dip galvanizing waste
https://doi.org/10.21122/1683-6065-2023-1-124-127
Abstract
The paper considers the technological features of thermodiffusion galvanizing of fasteners in a powder mixture containing the main waste of hot galvanizing it is gartzink. The advantages of preliminary fluxing over thermal diffusion zinc plating are noted. The microstructure of the obtained diffusion layers on steel 40Х was studied, the features of the saturation kinetics and the quality of the resulting layers were noted.
About the Authors
V. G. Dashkevich
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
P. S. Myshkevich
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
N. M. Barankevich
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
References
1. Szłapa I. Influence of corrosion on chosen mechanical properties of fasteners – comparison of anticorrosion properties of zinc coatings, Doctor dissertation, WBMiI ATH Bielsko‑Biała, 2017.
2. Jedrzejczyk D., Szłapa I., Skotnicki W., Waś-Solipiwo, J., Jurasz, Z. Thermal diffusion as the alternative of hot‑dip zinc coating for fasteners, 26th international conference on Metallurgy and materials, Metal 2017, May 24–26, 2017, Brno, Czech Republic, pp. 1059–1064.
3. Konstantinov V. M., Gegenja D. V., Bogdanchik M. I. Analiz rynka cinka i cinkovyh othodov dlja poluchenija antikorrozionnyh pokrytij [Analysis of the zinc and zinc waste market for anti‑corrosion coatings].Metallurgija: respublikanskij mezhvedomstvennyj sbornik nauchnyh trudov = Metallurgy: republican interdepartmental collection of scientific papers. Minsk, BNTU Publ., 2015, vyp. 36, pp. 272–283.
4. Evans D. W. Next generation technology for corrosion protection in ground support elements, 2014 Coal Operators’ Conference, 12–14 February 2014, The University of Wollongong, Northfields Ave, Australia, pp. 177–185.
5. Konstantinov V. M., Gegenja D. V. Sozdanie sinteticheskih nasyshhajushhih smesej dlja TDC iz othodov gorjachego cinkovanija [Creation of synthetic saturating mixtures for TDTs from hot‑dip galvanizing waste]. Sozdanie novyh i sovershenstvovanie dejstvujushhih tehnologij i oborudovanija nanesenija gal’vanicheskih i ih zameshhajushhih pokrytij = Creation of new and improvement of existing technologies and equipment for applying galvanic and their replacement coatings. Minsk, BGTU Publ. 2014, pp. 132–134.
6. Urbanovich N. I., Komarov O. S., Volosatikov V. I., Lecko A. I. Vlijanie soderzhanija nasyshhajushhego komponenta v sisteme gartcink – Al2O3 na tolshhinu pokrytija, izmenenie razmerov i massy obrazcov pri termodiffuzionnom cinkovanii [The influence of the content of the saturating component in the system hardzinc – Al2O3 on the thickness of the coating, the change in the size and weight of the samples during thermal diffusion zinc plating]. Lit’e i metallurgija = Foundry production and metallurgy, 2011, no. 2, pp. 54–56.
7. https://metal-archive.ru/cinkovye-pokrytiya/48-diffuzionnoe-cinkovanie-parofazovym-metodom.html.
Review
For citations:
Dashkevich V.G., Myshkevich P.S., Barankevich N.M. Technological aspects of processing steel products in powder mixtures containing hot‑dip galvanizing waste. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2023;(1):124-127. (In Russ.) https://doi.org/10.21122/1683-6065-2023-1-124-127
Views:
264
Email this article 