A study of the workers’ working conditions in areas of the manufacture castings from copper alloys
https://doi.org/10.21122/1683-6065-2023-2-125-128
Abstract
The results of the study of workers working conditions at the areas of the manufacture of castings from copper alloys are presented. It is noted that the main production factors of working conditions are noise, vibration, dustiness, gas contamination, temperature, intensity of infrared (thermal) radiation, severity and labor process intensity. The results have shown that at all workplaces there are exceedances of permissible values for noise and local vibration, the content of dust and harmful substances in the air of the working environment, the intensity of infrared (thermal) radiation and temperature. It is noted that the work performed due to the severity and labor process intensity can negatively affect the workers’ health.
Keywords
About the Authors
A. M. Lazarenkov
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
I. A. Ivanov
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
M. A. Sadokha
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
References
1. Lazarenkov A. M., Horeva S.A. Analiz proizvodstvennyh faktorov litejnyh cehov [Analysis of production factors of foundries]. Trudy 24‑j Mezhdunarodnoj nauchno‑tehnicheskoj konferencii "Litejnoe proizvodstvo i metallurgija 2016, Belarus’". Minsk, 19–21 oktjabrja 2016 = Proceedings of the 24th International Scientific and Technical Conference. "Foundry and metallurgy 2016, Belarus". Minsk, October 19–21, 2016. Minsk, pp. 117–120.
2. Lazarenkov A. M. Issledovanie uslovij truda rabotajushhih v cehah cvetnogo lit’ja [Study of working conditions of workers in non‑ferrous casting shops]. Lit’e i metallurgija = Foundry production and metallurgy, 2020, no. 1, pp. 122–124.
3. Lazarenkov A. M., Sadoha M.A. Issledovanie shumovogo faktora uslovij truda v litejnom proizvodstve [Study of the noise factor of working conditions in the foundry]. Lit’e i metallurgija = Foundry production and metallurgy, 2022, no. 2, pp. 130–136.
4. Lazarenkov A. M., Sadoha M.A. Issledovanie vibrobezopasnosti truda v litejnom proizvodstve [Study of labor vibration safety in foundry production]. Litejnoe proizvodstvo = Foundry, 2022, no. 5, pp. 30–35.
5. Lazarenkov A. M., Horeva S.A., Mel’nichenko V. V. Ocenka vlijanija shuma na rabotajushhih v litejnom proizvodstve [Evaluation of the impact of noise on workers in the foundry]. Lit’e i metallurgija = Foundry production and metallurgy, 2011, no. 3 (62), pp. 194–195.
6. Lazarenkov A. M., Horeva S.A., Mel’nichenko V. V. Ocenka vlijanija vibracii na rabotajushhih v litejnom proizvodstve [Evaluation of the impact of vibration on workers in the foundry]. Lit’e i metallurgija = Foundry production and metallurgy, 2011, no. 3 (62), pp. 192–193.
7. Lazarenkov A. M., Horeva S.A. Vlijanie pyli v vozduhe rabochih mest na professional’nuju zabolevaemost’ rabotajushhih v litejnyh cehov [Influence of dust in the air of workplaces on occupational morbidity of workers in foundries]. Trudy 24‑j Mezhdunarodnoj nauchno‑tehnicheskoj konferencii "Litejnoe proizvodstvo i metallurgija 2016, Belarus’". Minsk, 19–21 oktjabrja 2016 = Proceedings of the 24th International Scientific and Technical Conference. "Foundry and metallurgy 2016, Belarus". Minsk, October 19–21, 2016. Minsk, pp. 117–120.
8. Lazarenkov A. M., Horeva S.A., Mel’nichenko V. V. Prognozirovanie soderzhanija vrednyh veshhestv v vozduhe rabochih zon uchastkov litejnyh cehov [Forecasting the content of harmful substances in the air of working areas of foundry shops]. Lit’e i metallurgija = Foundry production and metallurgy, 2012, no. 3 (67), pp. 79–81.
9. Lazarenkov A. M. Issledovanie vozduha rabochih zon litejnyh cehov [Study of the air in the working areas of foundries]. Lit’e i metallurgija = Foundry production and metallurgy, 2019, no. 2, pp. 138–142.
10. Lazarenkov A. M., Horeva S.A. Ocenka parametrov mikroklimata rabochih mest litejnyh cehov [Evaluation of the microclimate parameters of the workplaces of foundries]. Trudy 25‑j Mezhdunarodnoj nauchno‑tehnicheskoj konferencii "Litejnoe proizvodstvo i metallurgija 2017. Belarus’". Minsk, 18–19 oktjabrja 2017 = Proceedings of the 25th International Scientific and Technical Conference "Foundry and Metallurgy 2017. Belarus". Minsk, October 18–19, 2017. Minsk, pp. 216–218.
11. Lazarenkov A. M., Horeva S.A. Vlijanie parametrov mikroklimata na rabotajushhih v litejnyh cehah [Influence of microclimate parameters on workers in foundries]. Lit’e i metallurgija = Foundry production and metallurgy, 2012, no. 3 (67), pp. 82–84.
12. Lazarenkov A. M., Horeva S.A. Ocenka uslovij truda litejshhikov po infrakrasnomu (teplovomu) izlucheniju [Evaluation of working conditions of foundry workers by infrared (thermal) radiation]. Lit’e i metallurgija = Foundry production and metallurgy, 2010, no. 3 (57), pp. 144–146.
13. Lazarenkov A. M. Klassifikacija proizvodstvennyh faktorov litejnogo proizvodstva [Classification of production factors of foundry production]. Lit’e i metallurgija = Foundry production and metallurgy, 2021, no. 3, pp. 118–122.
14. Lazarenkov A. M., Kot T. P. Metodika kompleksnoj ocenki uslovij truda v litejnom proizvodstve [Methodology for a comprehensive assessment of working conditions in the foundry]. Lit’e i metallurgija = Foundry production and metallurgy, 2021, no. 3, pp. 112–117.
Review
For citations:
Lazarenkov A.M., Ivanov I.A., Sadokha M.A. A study of the workers’ working conditions in areas of the manufacture castings from copper alloys. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2023;(2):125-128. (In Russ.) https://doi.org/10.21122/1683-6065-2023-2-125-128
Views:
216
Email this article 