Comparative analysis of hot‑rolled sheet rolling process modeling results in QForm VX environment with technical characteristics of the hot strip mill of JSC “Uzmetkombinat”
https://doi.org/10.21122/1683-6065-2024-1-55-59
Abstract
The paper presents an analysis of the methodology for calculating the parameters of hot‑rolled low‑carbon steel strip on a 1600 wide strip mill. Based on the analysis, a computer program for quick calculation of rolling parameters has been developed. A solid‑state model was constructed and the rolling process was simulated in the QForm environment. A comparative analysis was carried out with the passport data of the “Danieli” unit based on the modeling results. The obtained modeling results do not exceed the maximum allowable deviations for rolling force and geometric parameters of the hot‑rolled strip.
About the Authors
J. O. Olimzhonov
Uzmetkombinat
Uzbekistan
Bekabad, Uzbekistan, 1, Sirdaryo str.
Uzbekistan
Bekabad, Uzbekistan, 1, Sirdaryo str.
N. I. Sherbutayev
Toshkent Metallurgiya Zavodi
Uzbekistan
Uzbekistan
Tashkent, Uzbekistan, 1, TKAD str.
A. S. Tataru
National University of Science and Technology "MISIS"
Russian Federation
Moscow, Russia, 4, Leninskiy ave.
Russian Federation
Moscow, Russia, 4, Leninskiy ave.
References
1. Investment programms [Electronic resourse]. Accessed at: https://www.uzbeksteel.uz/about/475 (access date 29.04.2019).
2. Romantsev B.A., Goncharuk A. V., Vavilkin N. M., Samusev S. V. Obrabotka metallov davleniem [Metal forming]. Moscow, MISiS Publ., 2008.
3. Kriskovich S. M. Komp’juternoe modelirovanie tehnologicheskih processov OMD [Computer modeling of OMD technological processes]. Moscow, Metallurgija Publ., 2019.
4. Vlasov A. V. Metod konechnyh jelementov v modelirovanii tehnologicheskih processov obrabotki metallov davleniem [Finite element method in modeling technological processes of metal forming]. Moscow, MSTU named after N. E. Bauman Publ., 2018.
Review
For citations:
Olimzhonov J.O., Sherbutayev N.I., Tataru A.S. Comparative analysis of hot‑rolled sheet rolling process modeling results in QForm VX environment with technical characteristics of the hot strip mill of JSC “Uzmetkombinat”. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2024;(1):55-59. (In Russ.) https://doi.org/10.21122/1683-6065-2024-1-55-59
Views:
162
Email this article 