Magnesium alloys based on the Mg–Al– Mn–Ca system, additionally alloyed with Zr and La for high‑speed deformation of products and semi‑finished products
https://doi.org/10.21122/1683-6065-2024-1-83-92
Abstract
The article presents calculations and analysis of phase equilibria in magnesium alloys of the Mg–Al–Mn–Ca system with additional alloying of Zr and La. An assessment of the influence of the degree, deformation rate, and extrusion temperature on the composition, structure, and mechanical properties of the material has been evaluated. The impact of heat treatment of deformed samples on the complex of strength and plastic properties has been investigated.
About the Authors
A. T. Volochko
Physical‑Technical Institute of the National Academy of Sciences of Belarus
Belarus
Belarus
A.T. Minsk, Belarus, 10, Akademika Kuprevicha str.
V. A. Zelenin
Physical‑Technical Institute of the National Academy of Sciences of Belarus
Belarus
Belarus
A.T. Minsk, Belarus, 10, Akademika Kuprevicha str.
M. S. Kovalko
Physical‑Technical Institute of the National Academy of Sciences of Belarus
Belarus
Belarus
A.T. Minsk, Belarus, 10, Akademika Kuprevicha str.
D. S. Fedorovich
Physical‑Technical Institute of the National Academy of Sciences of Belarus
Belarus
Belarus
A.T. Minsk, Belarus, 10, Akademika Kuprevicha str.
Wang Cheng
Jilin University
China
Changchun, China, Renmin str.
China
Changchun, China, Renmin str.
References
1. Franceva N. V., Wojciechowski V. N., Savchenkov S. A, Bazhin V. Yu. Sintez magnij‑cirkonievyh ligatur [Synthesis of master alloys magnesium‑zirconium]. Mezhdunarodnyj nauchno‑issledovatel’skij zhurnal = International scientific research journal, 2016, no. 7, part 4, pp. 138–142.
2. Zhao-Yuan Meng, Cheng Wang, Zhen-Ming Hua, Min Zha, and Hui-Yuan Wanga. Achieving extraordinary thermal stability of fine‑grained structure in a dilute magnesium alloy. Material Research letter, 2022, vol. 10, iss. 12, pp. 797–804.
3. Mei-Xuan Li, Cheng Wang, Yi-Jia Li, Da-Wei Wang, Min Zha, Yipeng Gao, Hui-Yuan Wang. Tailoring the microstructure and enhancing the corrosion resistance of extruded dilute Mg–0.6Al–0.5Mn–0.25Ca alloy by adding trace Ce. Corrosion Science, 2022, vol. 207, p. 110605.
4. Pliseckaja I. V. Issledovanie vlijanija malyh dobavok kal’cija na strukturu i svojstva litejnyh magnievyh splavov sistemy Mg– Al–Zn–Mn s cel’ju povyshenija temperatury vozgoranija: dis. … kand. tehn. nauk [Study of the influence of small calcium additions on the structure and properties of cast magnesium alloys of the Mg–Al–Zn–Mn system in order to increase the ignition temperature. Ph.D. tech. Sci. diss.]. Moscow, MISiS Publ., 2014.
5. Belov V. D., Koltygin A. B., Belov H.A., Pliseckaja I. V. Innovacii v oblasti litejnyh magnievyh splavov [Innovations in area of cast magnesium alloys]. Metallurg = Metallurgist, 2010, no. 5, pp. 67–70.
6. Koltygin A. B., Pliseckaja I. V. Perspektivy razvitija magnievyh litejnyh splavov, svjazannye s primeneniem kal’cija v kachestve legirujushhej dobavki [Prospects for the development of magnesium cast alloys associated with the use of calcium as an alloying additive]. Litejshhik Rossii = Foundryman of Russia, 2012, no. 1, pp. 38–41.
7. Koltygin A. B., Pliseckaja I. V. Osobennosti plavki magnievyh splavov, legirovannyh kal’ciem v zashhitnoj gazovoj srede, soderzhashhej jelegaz [Features of melting magnesium alloys alloyed with calcium in a protective gas environment containing SF6 gas]. Progressivnye litejnye tehnologii = Progressive foundry technologies, 2011, pp. 40–42.
Review
For citations:
Volochko A.T., Zelenin V.A., Kovalko M.S., Fedorovich D.S., Cheng W. Magnesium alloys based on the Mg–Al– Mn–Ca system, additionally alloyed with Zr and La for high‑speed deformation of products and semi‑finished products. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2024;(1):83-92. (In Russ.) https://doi.org/10.21122/1683-6065-2024-1-83-92
Views:
205
Email this article 